Software installation
2.2 Uninstalling the SIMATIC NET PC software
Procedure
NOTICE
The procedure recommended here deletes the entire SIMATIC NET PC software on the
PG/PC not only the driver for the communications processor.
Uninstall the entire software package as described and recommended in the installation
manual "SIMATIC NET, PC Software".
You will find the installation manual on the SIMATIC NET DVD or on the Product Support
pages under the following entry ID:
42784913 (http://support.automation.siemens.com/WW/view/en/42784913)
16
Operating Instructions, 10/2012, C79000-G8976-C277-01
CP 5613 A3 / CP 5614 A3