Download Print this page

Siemens SIMATIC NET CP 5613 A2 Operating Instructions Manual

Pg/pc - profibus
Hide thumbs

Advertisement

Quick Links

Siemens SIMATIC NET CP 5613 A2 Operating Instructions Manual

Advertisement

loading

  Also See for Siemens SIMATIC NET CP 5613 A2

  Related Manuals for Siemens SIMATIC NET CP 5613 A2

  Summary of Contents for Siemens SIMATIC NET CP 5613 A2

  • Page 1 Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment SERVICE CENTER REPAIRS WE BUY USED EQUIPMENT • FAST SHIPPING AND DELIVERY Experienced engineers and technicians on staff Sell your excess, underutilized, and idle used equipment at our full-service, in-house repair center We also offer credit for buy-backs and trade-ins •...
  • Page 2 ___________________ CP 5613 A2 / CP 5614 A2 Preface ___________________ Description of the device ___________________ Software installation SIMATIC NET ___________________ Hardware installation PG/PC - PROFIBUS ___________________ CP 5613 A2 / CP 5614 A2 Configuration ___________________ Technical specifications Operating Instructions ___________________ Certification 12/2012 C79000-G8976-C301-02...
  • Page 3 Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.
  • Page 4: Table Of Contents

    Table of contents Preface ..............................5 Components of the product......................5 Description of the device ........................... 9 CP 5613 A2 product characteristics ....................9 CP 5614 A2 product characteristics ....................10 PROFIBUS interface........................11 Meaning of the LED display ......................12 Software installation..........................15 Installing the driver........................15 Uninstalling the driver ........................15 Installing the SIMATIC NET PC software ..................16 Uninstalling the SIMATIC NET PC software................16...
  • Page 5 Table of contents CP 5613 A2 / CP 5614 A2 Operating Instructions, 12/2012, C79000-G8976-C301-02 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 6: Preface

    ● Certificate of license Please check that the consignment you have received is complete. If the consignment is incomplete, contact your supplier or your local Siemens office. Validity of this documentation These operating instructions are valid for the following products: ●...
  • Page 7 In addition to the product documentation, the comprehensive online information platform of Siemens Automation Customer Support supports at any time and at any location in the world. You will find the Service & Support pages on the Internet at the following address: (http://support.automation.siemens.com/WW/llisapi.dll?func=cslib.csinfo2&aktprim=99&lang=...
  • Page 8 718979&caller=view) SITRAIN - Siemens training for automation and industrial solutions With over 300 different courses, SITRAIN covers the entire Siemens product and system spectrum in the field of automation and drive technology. Apart from the classic range of courses, we also offer training tailored for individual needs and a combination of different teaching media and sequences, for example self-learning programs on CD-ROM or on the Internet.
  • Page 9 Preface 1.1 Components of the product CP 5613 A2 / CP 5614 A2 Operating Instructions, 12/2012, C79000-G8976-C301-02 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 10: Description Of The Device

    Description of the device CP 5613 A2 product characteristics CP 5613 A2 characteristics The CP 5613 A2 is a communications processor for connecting PCs to PROFIBUS. The essential characteristics are as follows: ● The CP 5613 A2 is equipped with a PROFIBUS interface allowing up to 12 Mbps. It is intended for operation in PGs and PCs with a PCI bus interface according to the PCI standard V2.2.
  • Page 11: Cp 5614 A2 Product Characteristics

    Description of the device 2.2 CP 5614 A2 product characteristics CP 5613 A2 appearance The following figure shows the CP 5613 A2 communications processor: Yellow and green status LED PROFIBUS interface 1 (master or slave) CP 5614 A2 product characteristics CP 5614 A2 characteristics The CP 5614 A2 is a communications processor for connecting PCs to PROFIBUS.
  • Page 12: Profibus Interface

    You will find information about the structure of a PROFIBUS network in the system manual "PROFIBUS Network Manual". The document is part of the Manual Collection. You will also find this on the Product Support pages under the following entry ID: 35222591 (http://support.automation.siemens.com/WW/view/en/35222591) CP 5613 A2 / CP 5614 A2 Operating Instructions, 12/2012, C79000-G8976-C301-02...
  • Page 13: Meaning Of The Led Display

    Description of the device 2.4 Meaning of the LED display PIN assignment The D-sub female connector has the following pin assignment: Short name Meaning Input/output Socket pin 1 is not connected. NC (M24) Socket pin 2 is not connected. With other MPI/DP components, the return line of the floating 24 V power supply may be via this pin.
  • Page 14 Description of the device 2.4 Meaning of the LED display Green and yellow LED Function green lit DP master: Shows the token rotation (in other words, normal operation). green off DP master: Incorrect bus parameters, defective bus or CP not in operation green flashing at one second intervals DP master: Bad database green and yellow flashing alternately...
  • Page 15 Description of the device 2.4 Meaning of the LED display CP 5613 A2 / CP 5614 A2 Operating Instructions, 12/2012, C79000-G8976-C301-02 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 16: Software Installation

    Software installation Installing the driver installation of the CP 5613 A2 / CP 5614 A2 driver The driver is installed automatically when you install the "SIMATIC NET, PC Software, Edition 11/2003" (or higher) or the Developer Kit (version 3.1). Note For the STEP 7 version approved for the communications processor, refer to the readme file of STEP 7.
  • Page 17: Installing The Simatic Net Pc Software

    Install the software as described in the installation manual "SIMATIC NET PC Software". You will find this installation manual on the Product Support pages under the entry ID: Auto-Hotspot (http://support.automation.siemens.com/WW/view/en/61630923) You should also note the current information on the SIMATIC NET PC software on the Product Support pages: Support (http://support.automation.siemens.com/WW/view/en/10805995/133400)
  • Page 18: Alternative Software Packets

    "SIMATIC NET PC Software". You will find the installation manual on the SIMATIC NET DVD or on the Product Support pages under the following entry ID: 61630923 (http://support.automation.siemens.com/WW/view/en/61630923) Alternative software packets Alternatives to SIMATIC NET PC software To operate the CP, alternative software packages such as STEP 7 V5.5 or STEP 7 Professional V11 are also available.
  • Page 19 Software installation 3.5 Alternative software packets CP 5613 A2 / CP 5614 A2 Operating Instructions, 12/2012, C79000-G8976-C301-02 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 20: Hardware Installation

    Hardware installation Safety notices WARNING Electric shock possible - work only when the power supply is off Opening the PG/PC and plugging or pulling the communications processor is permitted only when the power is off. Turn off your PG/PC and pull the power cable connector before you start the hardware installation.
  • Page 21: Installing Hardware

    Hardware installation 4.2 Installing hardware Installing hardware Permitted number of communications processors in the PG/PC The driver software supports a maximum of 4 CPs per PG/PC, of which a maximum of 2 CPs may be in configured mode. 4.2.1 Automatic adaptation of the bus clock speed Automatic adaptation of the bus clock speed The CP is designed for a bus clock speed of 66 MHz.
  • Page 22: Hardware Compatibility

    Hardware installation 4.3 Hardware compatibility 7. Insert the power plug into the socket again and turn your PG/PC on. The plug and play function of Windows automatically searches for a driver. 8. Follow the instructions of the Hardware Wizard of Windows. activate the search for drivers on the Internet.
  • Page 23 Hardware installation 4.3 Hardware compatibility CP 5613 A2 / CP 5614 A2 Operating Instructions, 12/2012, C79000-G8976-C301-02 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 24: Configuration

    "Commissioning PC Stations“. You will find this document on the Product Support pages under the following entry 13542666 (http://support.automation.siemens.com/WW/view/en/13542666) NOTICE No downloading of a CP 5613 A2 configuration to a CP 5614 A2 A DP slave configuration for a CP 5613 A2 must not be downloaded to a CP 5614 A2 because the DP slave will not work with this configuration.
  • Page 25 Configuration CP 5613 A2 / CP 5614 A2 Operating Instructions, 12/2012, C79000-G8976-C301-02 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 26: Technical Specifications

    Technical specifications Technical specifications for CP 5613 A2 / CP 5614 A2 Construction Values Module format PC card, short PCI format Dimensions (H x W x D) in mm 107 x 18 x 168 Weight CP 5613 A2: 105 g CP 5614 A2: 120 g Bus interface PCI V2.2, plug and play...
  • Page 27 Technical specifications Interfaces Mode of the PROFIBUS interface Floating (interface signals), non-floating (cable shield) PROFIBUS controller used CP 5613 A2 / CP 5614 A2 • Master: ASPC2R ST E2a CP 5614 A2 • Slave: DPC31 Data transfer Transmission speed 9.6 kbps to 12 Mbps Electromagnetic compatibility (EMC) Emission Class B to EN 55022...
  • Page 28 Technical specifications Mechanical environmental conditions Vibration during operation tested to DIN EN 60068-2-6 during operation 10 to 58 Hz, amplitude 0.0375 mm; 58 to 500 Hz, acceleration 4.9 m/s² 3 axes Shock during operation Tested to DIN EN 60068-2-27 during operation half sine: 50 m/s²...
  • Page 29 Technical specifications CP 5613 A2 / CP 5614 A2 Operating Instructions, 12/2012, C79000-G8976-C301-02 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 30: Certification

    You will find the EC declaration of conformity for this communications processor on the Product Support pages under the following entry ID: 63367995 (http://support.automation.siemens.com/WW/view/en/63367995) Machinery directive This communications processor is not a machine in the sense of the EC directive 2006/42/EEC (Machinery Directive).
  • Page 31 ● Consult the dealer or an experienced radio/TV technician for help. Siemens AG is not responsible for any radio television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by Siemens AG. The correction of interference caused by such unauthorized modification, substitution or attachment will be the responsibility of the user.
  • Page 32: Index

    Index Oblique installation position, 19 Bus clock speed, 20 PCI, 25 PIN assignment, 12 Compatibility, 21 PROFIBUS network, 11 Components of the product, 5 Connectors, 25 Contact, 7 Converting, 21 Replacing, 21 Data transmission speed, 26 Dimensions, 25 SIMATIC NET documentation, 6 Documentation on the Internet, 5 SIMATIC NET glossary, 7 D-sub female connector, 12...
  • Page 33 Index CP 5613 A2 / CP 5614 A2 Operating Instructions, 12/2012, C79000-G8976-C301-02 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 34 Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment SERVICE CENTER REPAIRS WE BUY USED EQUIPMENT • FAST SHIPPING AND DELIVERY Experienced engineers and technicians on staff Sell your excess, underutilized, and idle used equipment at our full-service, in-house repair center We also offer credit for buy-backs and trade-ins •...

This manual is also suitable for:

Simatic net cp 5614 a2