Scanner Connection; Installation Of Software - UP3D UP500 User Manual

UP3D TECH CO.,LTD

1.2.2 Scanner Connection

（1）Connect USB cable of scanner to the computer's USB port；
（2）Connect the power line to the power port of scanner；
（3）Insert the UP3D dongle ;
（4）Power on the scanner；
Figure 1-2
1 ） The connection requires a ground wire to avoid damaging the internal
components of the scanner！
2）Please unplug the scanner when it's thunderstorms!
1.3

Installation of Software

Installation steps vary depending on the hardware version of the scanner!
Figure 1-3
9