UP3D UP500 User Manual page 19

UP3D TECH CO.,LTD
When editing an order, please pay attention to the following:
1） Do not modify "model source".
2）After saving modifiction,it will be prompted 're-scan'or 'import order?'
The key information includes: add or delete tooth, modify design type, teeth design
parameters, scan settings.
(2) View the order: check the details of the order.
(3) Delete Order: delete the specified order from the order library. When deleting the order, it will
pop up "Delete completely" or "Keep the data".
Delete completely: completely remove the order from the order library and delete the model
file stored on the disk.
Keep the data：orders are only deleted from the order library, but the model files on the disk
are still kept.
(4) Rest order: change order status
Reset to design: The order that have been designed or milled, revert to the state when the scan
was completed , remodeling
Reset to create: an order that has been scanned, designed, or processed, reverted to the state
when the creation was completed, and rescanned;
(5) Open local file: Open the directory where the order is located.The folder contains scanned data
and design data.
(6) Order import and export
Export Order: Export order information and order model file to "uorder2 file" in the order
library. You can back up any orders you want. Uoder2 file can be imported into
UPDentalManager by "Import Order" function.
Import Order : import "uorder2" order into UPDentalManager.
Export exocad project : UP3D order can be exported to exocad project files so you can import
to Exocad for design easily
(7) Reset the checkout source: as long as the data source computer user name is changed when the
order is checked out, in order to avoid the data source computer name does not match the
computer IP, so it needs to be resetted the checkout source. But resetting the checkout source is
only for the current order.
19