UP3D UP500 User Manual
  1. Manuals
  2. Brands
  3. UP3D Manuals
  4. Medical Equipment
  5. UP500
  6. User manual

UP3D UP500 User Manual

Dental system
Hide thumbs
Table of Contents

Advertisement

Quick Links

UP3D TECH CO.,LTD
UP3D DENTAL SYSTEM
User Manual
1

Advertisement

Table of Contents
loading

Related Manuals for UP3D UP500

Summary of Contents for UP3D UP500

  • Page 1 UP3D TECH CO.,LTD UP3D DENTAL SYSTEM User Manual...

  • Page 2: Table Of Contents

    UP3D TECH CO.,LTD Contents Ⅰ.Installation of UP3D DentalSystem....................5 1.1 Hardware Configuration......................5 1.2 Installation of Hardware......................6 1.2.1 Check the scanner and accessories..................6 1.2.2 Scanner Connection.........................9 1.3 Installation of Software......................9 1.4 Device Diagnostics......................... 10 1.5 Calibration..........................12 1.5.1 Step of calibration........................ 12 UPDentalManager............................16...
  • Page 3 UP3D TECH CO.,LTD 4.4.4 Implant scan body scanning....................57 4.4.5 Wax-up scanning......................... 58 4.4.6 Freedom scan........................61 .Appendix..............................62 Ⅴ 5.1 5.1 Mouse and shortcut key operation..................62 5.1.1 Mouse operation........................62 5.1.2 5.1.2 Shortcut keys operation....................62 5.2 UPSCAN scanning software....................63 5.2.1 5.2.1 In cloud point or mesh edit mode................
  • Page 4 UP3D TECH CO.,LTD Product Introduction UP3D focuses on the development and manufacture of dental model scanner, CAD/CAM dental restoration software. At present, the main products are: high precision blue light model scanners, dental design software UPCAD, dental computer-aided manufacture software UPCAM.

  • Page 5: Ⅰ.installation Of Up3D Dentalsystem

    UP3D TECH CO.,LTD Ⅰ.Installation of UP3D DentalSystem 1.1 Hardware Configuration To have a better experience, please configure your computer as recommended. Item Recommended Windows7/10,64 bit professional, Win10 is recommended Windows system Intel Core i7 or above (or other same level CPU)

  • Page 6: Installation Of Hardware

    UP3D TECH CO.,LTD 1.2 Installation of Hardware 1.2.1 Check the scanner and accessories Accessories Quantity Picture Compatible scanners All scanners USB cable All scanners Power cable AcuBlu PCI-E card  The computer must have sufficient PCI interface Blue Tack All scanners...
  • Page 7 UP3D TECH CO.,LTD Shade cloth All scanners Calibration board All scanners Stone calibration board All scanners Screw retained plate Plate All scanners Regular plate UP200 Die plate AcuBlu 6-hole-die plate...
  • Page 8 UP3D TECH CO.,LTD UP300 12-hole-die plate Impression UP300 fixtures Dongle All scanners User Manual All scanners Figure 1-1...

  • Page 9: Scanner Connection

    UP3D TECH CO.,LTD 1.2.2 Scanner Connection （1）Connect USB cable of scanner to the computer's USB port； （2）Connect the power line to the power port of scanner； （3）Insert the UP3D dongle ; （4）Power on the scanner； Figure 1-2 Figure 1-3 1 ） The connection requires a ground wire to avoid damaging the internal components of the scanner！...

  • Page 10: Device Diagnostics

    （7）Click next, create a desktop icon. （8）Click install and start the installation. （9）finish the installation. After the installation, the shortcut of UP3D DentalSystem and relative software would be created on the desktop Device Diagnostics Used to diagnose working status of scanner and components Diagnostic Method：...
  • Page 11 UP3D TECH CO.,LTD （figure 1-4）. Manual detection: expert detection mode, check the status and parameters of all  components drivers and connection（figure 1-5）. Figure 1-4 Figure 1-5...

  • Page 12: Calibration

    Figure 1-7 1.5.1 Step of calibration （1）Double-click the ‘UP3D Scan Calibration’ shortcut or click the Calibrate scanner button at the dental manager interface to start the Calibration function. （2）insert the calibration board and use the shading cloth. Click ‘start’ (figure 1-8) to enter the...
  • Page 13 UP3D TECH CO.,LTD Figure 1-8 Calibration startup interface （3）Enter calibration interface（figure1-9） Figure 1-9 calibration interface  Adjust the appropriate gain value and exposure time...
  • Page 14 UP3D TECH CO.,LTD  Select one of the calibration methods to calibrate, please select AF (automatic calibration), MF (manual calibration) is generally used in expert mode. （4）Select automatic calibration method：click【AF】to start calibrate 【AF】automatic calibration: calibrate automatically  After click AF, the scanner starts to calibrate automatically (figure 1-10). In this process, the calibration progress bar will be displayed at the bottom of the interface.
  • Page 15 UP3D TECH CO.,LTD Figure1-12 The interface of manual calibration finishing 【Recollection】：when the image acquisition failed, left click “recollection” or “F5” to recollect. Please adjust the gain value and exposure time manually when recollect.

  • Page 16: Ⅱ.updentalmanager

    UP3D TECH CO.,LTD Ⅱ.UPDentalManager UPDentalManager, mainly provides the new order creating and management, order query and other functions 2.1 Main interface Figure 2-1 The main interface consists of the following parts(Figure 2-1)： 1.Menu bar 2.Order query 3.Order list 4.Design information 5.Prompt bar...
  • Page 17 UP3D TECH CO.,LTD Dongle management: check and update the dongle license Calibrate the scanner: start the calibration （2）Order query Search the orders from yesterday or this week Advanced Search:(figure 2-2), searched by date range or by customer Figure 2-2 (3) Order list Display the queried order list.

  • Page 18: Order Management

    UP3D TECH CO.,LTD Single click：click on the order management list to displayed the tooth number and design type of current order, also could view the model in real time at the information area (right bottom corner) Right click：select the order and right click or right click at the blank area, pops up the menu as figure2-3.
  • Page 19 UPDentalManager by “Import Order” function. Import Order : import “uorder2” order into UPDentalManager. Export exocad project : UP3D order can be exported to exocad project files so you can import to Exocad for design easily (7) Reset the checkout source: as long as the data source computer user name is changed when the order is checked out, in order to avoid the data source computer name does not match the computer IP, so it needs to be resetted the checkout source.
  • Page 20 UP3D TECH CO.,LTD (8) Delete selected order temporary data: Delete the temporary scanned data. (10) Order Search Fuzzy search: in the search box of the menu bar, input directly content that you want to search and click “Enter”. The search range can be selected from the fuzzy search options in the advanced menu of the search area, including the order number, Memo, and Name.
  • Page 21 UP3D TECH CO.,LTD Figure 2-5 (11) Enter Scan and Design Double-click ‘scan’ or ‘design’ icon. It will start to scan or design according to current status. (12) Other Functions Calibrate Scanner: Click ‘Calibrate’ icon,it will enter calibrate interface. Select column function: Right click in the title bar of the order list,select column in the pop-up window,select ‘Hide’...
  • Page 22 UP3D TECH CO.,LTD The order server IP of computer B,C and D are set as IP of computer A by ‘CAD Configuration’. When opening UPDentalManager in the Computer B, C and D, it will display all created orders by computer A. Double-click the order, it will download model files automatically from computer A to current computer for designing.

  • Page 23: Updentalmanager Configuration

    UP3D TECH CO.,LTD 2.3 UPDentalManager Configuration General setting 2.3.1 Figure 2-8 (1) Tooth Notation: The default is the FDI Notation and it can be changed. (2) Save orders automatically: When you are designing, the order design files will be saved automatically.

  • Page 24: Upcad Configuration

    UP3D TECH CO.,LTD 2.3.2 UPCAD Configuration Figure (1) Order serve IP address: When using orders in this computer, click current computer. If you need sharing orders function, please input a IP address of computer that providing orders (IPv4); Reference: Checkout function.
  • Page 25 UP3D TECH CO.,LTD Figure 2-10 (5) UPCAD order path filename format: folder names used to personalize the storage order (Figure 2-11) Note: When you are modifying, please make sure that the folder name does not conflict with the same name.

  • Page 26: Upscan Configuration

    UP3D TECH CO.,LTD 2.3.3 UPSCAN Configuration Figure 2-12 Used to configure the scanning and output parameters of the scanner. (1) Material color: You can choose different projecting colors depending on your model color. When the model can not be scanned of current projecting color (because of reflection-the blue light can not scan the blue area of the model),you can choose different projecting color to scan the different color models.
  • Page 27 UP3D TECH CO.,LTD Turn it on if you need to scan the texture or pencil line of the model;The default status is off. (6) Output settings When scanning completely and export the model data, coordinate system of the transform the model by configuration.

  • Page 28: Manage Users

    UP3D TECH CO.,LTD (9) Use 6-hole-die plate, this function is only available for AcuBlu dental scanner; Use 12-hole-die plate,this function is only available for UP300 dental scanner. (10) Calibrate white balance When to scan the color texture, you need to calibrate the white balance. First enter the scanning interface, put a blank sheet of paper in the scanning chamber, and click [Calibrate White Balance] to complete the calibration.
  • Page 29 UP3D TECH CO.,LTD Figure 2-16...

  • Page 30: Ⅲ.authorization Management

    The software will not open if it has not be connected or the permissions are incorrect. You can open the UP3D Dongle Management by clicking the dongle button in the menu of the order management or by clicking the dongle information in the information bar.

  • Page 31: Ⅳ.model Scanning

    UP300 Application scope: gypsum, impression, bite wax, scan body, color texture, orthodontics, unsectioned model, all-in-one model, 12-hole multi-dies UP500 High precision Application scope: gypsum, impression, bite wax, scan body, color texture, orthodontics, unsectioned model, multi-dies UP360 Impression Scanner Application scope: One time impression...

  • Page 32: Use Of Accessories

    UP3D TECH CO.,LTD 4.2 Use of accessories 4.2.1 Die scan scanning with multi-dies plate scanning on the dental arch 4.2.2 Gypsum scan Full arch scan Jaw arch+wax-bite scan All-in -one scanning Occlusion scanning without Side-lay articulator scan Partial jaw arch scan...

  • Page 33: Impression Scan

    UP3D TECH CO.,LTD 4.2.3 Impression scan Single side impression scan Impression wax-bite scan Triple tray impression scan Triple tray impression partial scan 4.2.4 Implant scan body scanning Scan body scan Gingiva scan...

  • Page 34: Wax-Up Scanning

    UP3D TECH CO.,LTD 4.2.5 Wax-up scanning Single wax-up scan Wax-up bridge scan Combined wax-up scan Wax-up bottom scan...

  • Page 35: Main Interface

    UP3D TECH CO.,LTD 4.3 Main interface Figure4-1 Main interface components: ①Advanced setting ②Navigation ③Camera panel ④Tools ⑤Application panel 4.3.1 Application panel Different buttons are displayed in different scanning steps in Application panel, including previous, next, scan, and add scan. (1) 【previous】...
  • Page 36 UP3D TECH CO.,LTD （4）【Select the scanning area】 Function: Set the scan height and scan area Operation:-Click 【Front View】, Keep pressing the mouse left button , then drag the red arrow up and down, the area below the arrow will not be scanned.

  • Page 37: Tools

    UP3D TECH CO.,LTD Delete batch （9）【 】 Function: If you do not use die plate to scan the die and there is die scan data, then the die scan data would be deleted. If there is no die scan data, then delete the current die batch.
  • Page 38 UP3D TECH CO.,LTD View tools （1） View tools are used for viewing models in different directions. 2D sections （2） It is used to measure the occlusion gap in a 2D scene, this button is only displayed if there is antagonist data （3）Model editing tools-selection tool...
  • Page 39 UP3D TECH CO.,LTD 【Rectangle selection tool】 Operation: A1.Click 【Rectangle selection tool】 to enable or disable the rectangle selection function. A2. Click the mouse to determine the selection area of the rectangle,drag the mouse to select the model with a rectangle, then release the mouse, and all the data (including the uncovered area)in the rectangle range is marked as red.
  • Page 40 UP3D TECH CO.,LTD A2. Click the left button to start dragging and dropping the mouse to construct an arbitrary polygon area and release the mouse, all data in the range of the polygon (including the uncovered area) is marked in red.
  • Page 41 UP3D TECH CO.,LTD A4.Hold down the Ctrl key to click or frame the marked connected region for deduction. 【Visible】 Select visible is only used for mesh models, not for point cloud models, and only rectangle, polygonal, lasso selection tools can support the features;...
  • Page 42 UP3D TECH CO.,LTD are detected and displayed with blue lines. A2.You can drag and drop the hole radius to draw a blue hole boundary smaller than the radius in real time. A3.Click【One-key filling】then it will fill all selected holes. Model editing tools-【invert】...
  • Page 43 UP3D TECH CO.,LTD A1.Click【Margin edit】to enable or disable the margin line generation and editing function. A2.The software will display the tooth position indicator and the margin line panel when the function is enabled. A3.The tooth position diagram is used to select the tooth position, and the margin line is generated or edited for different tooth positions.
  • Page 44 UP3D TECH CO.,LTD Hand drawing editing: click and drag the left button on the margin to hand draw, which the margin line is in red. After release the left button, the margin line will be constructed according to the trail of the red line.

  • Page 45: Camera Panel

    UP3D TECH CO.,LTD 【 Ctrl 】 + 【 UP 】 : Overall upward translation of the margin line for the current tooth position 【Ctrl】+ 【Down】: Overall downward translation of the margin line for the current tooth position 【Alt】+ Mouse wheel：Adjust the overall translation threshold;...

  • Page 46: Scanning Step

    UP3D TECH CO.,LTD 4.4 Scanning step Start scanning  Create an order in UPDentalManager and start scanning; Create an order in EXO and start scanning;  The scanning step varies with specific conditions, mainly including the following conditions:  Order settings (ie,model type [gypsum model, impression model], if there is antagonist jaw, sectioned, use multi-dies plate or not, etc.)

  • Page 47: Model Scanning

    UP3D TECH CO.,LTD Figure4-5 4.4.1.2 Dies scanning A1. Insert the corresponding Dies on the multi-dies plate according to the hole position indication in the scanning guide. A2. Click【Next】/ press【Enter】to scan A3. Check if it needs to add scan after the scan is completed If you need to add scan, please refer to the add scan operation in this manual A4.
  • Page 48 UP3D TECH CO.,LTD Application: need to scan the adjacent tooth relationship, the die has been sectioned and use the multi-dies plate to scan. Take the model with antagonist jaw (the antagonist jaw can be gypsum or wax-bite) for example to introduce the scanning process.
  • Page 49 UP3D TECH CO.,LTD Figure4-6 Figure4-6 A4. 【Remark】 Please drag the blue marker point to modify the marker point position when marking the tooth position in error. Click【Remark】,The points on the model are all cleared A5.Click【Next】to enter other scans after all the teeth marks are completed.
  • Page 50 UP3D TECH CO.,LTD A3. You can do a one-point alignment or a 3-point alignment by selecting the percentage in the fractional alignment when both of them fail. 100%: Align the entire model 75%: Model alignment from 75% below the occlusion...
  • Page 51 UP3D TECH CO.,LTD 4.4.2.2 Sectioned model without die plate Application: it needs to scan the adjacent tooth relationship and the dies has been sectioned, but without scanning the multi-dies plate, you can scan the dies directly on the model Take the model without antagonist jaw for example to introduce the scanning process.
  • Page 52 UP3D TECH CO.,LTD Application: For that needs to scan the adjacent tooth relationship, but the die is not sectioned. Take the model without antagonist jaw for example to introduce the scanning process. （1）Create an order A1. Create an order, select a tooth position and define a design type A2.
  • Page 53 UP3D TECH CO.,LTD Figure4-10 The model will display red after clicking the independent connected area with the left mouse button and display the text at the model: upper jaw, lower jaw and tooth position XX. If you encounter factors such as maxillary or mandibular scanning height clipping or the model itself, there are two connected areas, as shown below.

  • Page 54: Impression Scan

    UP3D TECH CO.,LTD A3. Check if it needs to add scan after the occlusion model is scanned (editable),if not, click 【Apply】. （3）All-in-one scanning A1.Follow the instruction of the scanning guide to put in a quadrant model (upper jaw and lower jaw) A2.Click【Next】/【Enter】to scan;...
  • Page 55 UP3D TECH CO.,LTD The impression automatically performs the invert in the export step. Single side impression scan (antagonist: opposite tray + wax-bite) 4.4.3.2 Application: For scanning impressions that have not been turned into gypsum. （1）Create an order A1. Create an order, select the tooth position and define a design type A2.
  • Page 56 UP3D TECH CO.,LTD A2. Select the following scan options and start scanning Model source: impression Impression tray: double side Occlusion: full arch （2）Triple tray impression scan (working model facing upward) A1. Follow the instructions of the scanning guide then insert the triple tray impression (working model facing upward) A2.

  • Page 57: Implant Scan Body Scanning

    UP3D TECH CO.,LTD A2. Click【Next】/【Enter】to scan; A3. Check if it needs to add scan after the impression is scanned (editable),if not, click【Apply】 (4) Automatic alignment: occlusion alignment (5) The order scanning is finished 4.4.4 Implant scan body scanning 4.4.4.1 Gypsum, scan body, with ginginva Application: For orders that need to scan the scan body for implant （1）Create an order...

  • Page 58: Wax-Up Scanning

    UP3D TECH CO.,LTD (6) T he order scanning is finished 4.4.5 Wax-up scanning 4.4.5.1 Gypsum model, sectioned, single wax-up (take no antagonist for example) （1）Create an order A1. Create an order, select the tooth position and define a design type A2.
  • Page 59 UP3D TECH CO.,LTD Occlusion: none; Adjacent tooth scan: sectioned model （2）Model scan A1. Follow the instructions of the scanning guide then insert the model A2. Click【Next】/【Enter】to scan; A3. Check if it needs to add scan after the model is scanned (editable),if not, click【Apply】...
  • Page 60 UP3D TECH CO.,LTD （3）Wax-up bridge scan A1. Follow the instructions of the scanning guide then insert the wax-up bridge A2. Click【Next】/【Enter】to scan; A3. Check if it needs to add scan after the wax-up bridge is scanned (editable),if not, click 【Apply】...

  • Page 61: Freedom Scan

    UP3D TECH CO.,LTD A3. Check if it needs to add scan after it is scanned (editable),if not, click【Apply】 (4) Automatic alignment: wax-up alignment (5) T he order scanning is finished 4.4.6 Freedom scan （1）Create an order A1. Create an order,select the tooth position and define a design type A2.

  • Page 62: Ⅴ.appendix

    UP3D TECH CO.,LTD Ⅴ.Appendix 5.1 5.1 Mouse and shortcut key operation 5.1.1 Mouse operation Operation Function Right button drag and Model rotating drop Wheel button drag and Model translating drop Wheel button scrolling Model zooming 5.1.2 5.1.2 Shortcut keys operation...

  • Page 63: Upscan Scanning Software

    UP3D TECH CO.,LTD 5.2 UPSCAN scanning software 5.2.1 5.2.1 In cloud point or mesh edit mode General shortcut keys （1） Cancel the selection 【Ctrl】+【C】 ： Invert the selection 【Ctrl】+【R】 ： Delete the selection 【Delete】 ： Undo 【Ctrl】+【Z】 ： Redo 【Ctrl】+【Y】...

  • Page 64: Shortcut Keys In Impression Scanning

    UP3D TECH CO.,LTD 5.2.2 Shortcut keys in impression scanning Single side impression and the antagonist is the other single side impression ( need to adjust the occlusion manually) Shift+left button: model rotating Shift+right button: model translating 5.2.3 Impression margin line edit function (UP300)
  • Page 65 UP3D TECH CO.,LTD In morphing （2） Shift+left button: deform In partial morphing （3） Shift+left button: radius adjustment In wax morphing （4） Shift+wheel button: radius adjustment Ctrl+wheel button: strength adjustment Attachment （5） Shift+left button+drag: translate Ctrl+left button+drag: rotate Ctrl+wheel button: lengthen...

This manual is also suitable for:

Up300Acublu

Table of Contents