Scanning Step; Multi-Dies Scanning - UP3D UP500 User Manual

UP3D TECH CO.,LTD

4.4 Scanning step

Start scanning
 Create an order in UPDentalManager and start scanning;
Create an order in EXO and start scanning;

The scanning step varies with specific conditions, mainly including the following conditions:
 Order settings (ie,model type [gypsum model, impression model], if there is antagonist jaw,
sectioned, use multi-dies plate or not, etc.)
UPSCAN settings (ie, if use texture, scan the occlusion relationship at first or not,etc.)


4.4.1 Multi-dies scanning

Application:
For single or multiple dies, no need for occlusion and adjacent tooth scans
Steps:
Create orders, follow the instructions for die scanning
4.4.1.1 Create orders
A1. Create an order, select the tooth position and define a design type
A2. Select the following scan options and start scanning.
Model source: Model.
Adjacent teeth: None (ie: use multi-dies plate)
46