Table of Contents
Advertisement
Panel Language
Choose the language to be used by the wireless
control unit.
Key Beep Tone
The tone range varies from silent to loud beep.
Audible Notifications
You can choose to hear a notification sound when
your sauna is ready for bathing and/or when a week
timer event becomes active.
2.9. Miscellaneous
2.9.1. Statistics
Pressing the Statistics icon brings to the screen a
recap of the most recent sauna bath (total time and
energy consumption). Before the first bath there is
no data stored in the memory. Touch the screen to
return to the previous screen.
2.9.2. Curve Diagram
The current readings of the temperature and humidity
sensors or the readings taken during the most recent
sauna bath are displayed as a graph.
Device pair-up
The following pair-up procedure is necessary to make the devices recognize each other and communicate:
. Switch on the wireless control unit. The Start Menu is displayed.
2.
Press the Main Menu icon. Use the page change to scroll through the Main Menu to Miscellaneous and select.
3. Use the page change to scroll to Device Pair-Up and select. This is the procedure to be used to
establish a connection between devices/device pairs.
4. Under the selected menu item you will find the pair-up procedure menu. When you are establishing
connections between device pairs for the first time, select Help. Read through the instructions and
follow them.
5. Press the Confirm icon to switch back to the Pair-Up Procedure menu:
Pair-Up Procedure
A) Click 'New code', and the display will show ' Panel code changed.
Renewing pairs is necessary.'
C) Click 'Heater', and the display will show 'Linking to Heater,
switch power on now.'
D) Turn power unit on within 10 seconds, and the display will show 'Successful pair-up with heater.'
If the pairing up was not successful, the display will show "Pair-up with heater FAILED". In this
case, return to Step B and repeat the procedure according to the
instructions.
6. To further add colour light, for example, press 'Colour light'.
NOTE! If you press the 'New Code' icon again, all connections are lost
and must be re-established!
2.9.3. Adjust Current Time and Day
Set the correct time and day. The clock must be
adjusted for summer/winter time.
2.9.4. Device Pair-Up
This procedure is used to establish a connection
between new devices/device pairs and to re-establish
any lost connections. The icon in the upper left corner
of the Start Menu indicates whether the connections
are active or whether connections are missing.
Note! The pair-up procedure is unnecessary if the
wireless control unit is connected to the power unit
with a cable. In this case the wireless control unit
does not need batteries or charging, since the required
operating voltage is supplied from the power unit
through the cable.
Pair-Up Help, page
Connection
active
Pair-Up Help, page 2
Pair-Up icon for heater
power unit
Pair-Up icon for colour
light power unit
EN
No
connection
5
Advertisement
Table of Contents
