Table of Contents
Advertisement
Set Fan Control
Set the function of the indoor unit fan when setpoint is satisfied.
1.
Tap the Menu button on the Home screen.
2.
Tap the Service button and then enter your password.
3.
Tap the Indoor Fan button.
4.
Cooling - Tap the Fan ON button (default) to make the indoor unit fan continue to run when
the cooling setpoint is satisfied. Tap the Fan OFF button to make the indoor unit fan stop
running when the cooling setpoint is satisfied. NOTE - The default setting, Fan On, is recom-
mended for highest efficiency.
5.
Heating - Tap the Fan ON button (default) to make the indoor unit fan con-
tinue to run when the heating setpoint is satisfied. Tap the Fan OFF button to
make the indoor unit fan stop running when the heating setpoint is satisfied.
NOTE - The default setting, Fan On, is recommended for highest efficiency.
NOTE - Controller requires confirmation that fan operation may stop when using alternate
heat connected through the HHE Relay Kit Four Dry-Contact board.
Figure 53. Set Fan Control
Figure 54. Confirm Heating Fan Off
49
Hide quick links:
Advertisement
Table of Contents
