Basic Balancing - IMKO SONO-VIEW Operating Instructions Manual

2017-05-24
The parameters are activated dynamically with setting the "Average parameter".

4.5.6 Basic Balancing

At the exchange of a sensor head, due to deviating cable lengths, it may be necessary to
perform a basic balancing in air. Hereby, the moisture measurement value of the probe is re-
aligned to the correct „Zero Value".
Manual SONO-VIEW Version 3_1
Use the
the individual parameters. The lower right
area shows the current value of the selected
parameter. To change the value, press the
key
The value now appears in the display. Use
the
press the button
leave the entry without changing the value.
Repeat the procedure for all parameters to be
adjusted.
If you have adjusted all parameters as
desired, select "SAVE" and confirm with the
key
into
You can leave the menu item "Average
Parameters" with the button
saving. Than all changes will be lost!
Actuate the button
balancing. The balancing will be performed
subsequently.
/ buttons to navigate between
.
/ buttons to adjust the value and
to accept. You can also
. Now the parameters are written back
the probe and are
in order to start the basic
now active.
without
Seite 25