IMKO SONO-VIEW Operating Instructions Manual page 22

Measure:
See point 1.1.1.2.1
Set:
In the last step, the calibration settings can be saved with "Save" to the previously selected
calibration memory location, or can be canceled with "Discard".
Note: After performing "Save", the original material calibration is preceded by an "OWN:",
indicating that this is a specially prepared material calibration.
Page 22
Manual SONO-VIEW Version 3_1
Use the
and "Set". The corresponding sub-point is selected with
the key
previous point.
1-Point Calibration(measure)
The tp value for the upper moisture value can be
adjusted manually using the
button
to move to the previous item.
Use the
"Discard". The corresponding sub-point is selected with
the key
previous point.
/ buttons to select between "Measure"
and the key can be used to switch to the
to accept the setting and press the button
/ buttons to toggle between "Save" and
and the key can be used to switch to the
2017-05-24
/ buttons. Press the