IMKO SONO-VIEW Operating Instructions Manual page 19

2017-05-24
Measure tp:
Set tp:
Manual SONO-VIEW Version 3_1
Use the
and "Set". The corresponding sub-point is selected
with the key
to the previous point.
Press the key
the key
After starting the measurement with the key
mean value of 10 measured tp values is formed. During
this phase, the SONO-View does not respond to any
input.
After completion of the measurement, the tp mean
value is displayed. Press the key
measured value and press the key
previous point.
The tp value can be adjusted manually using the
/
setting and press the button
item.
/ buttons to select between "Measure"
and the key
to start the tp measurement and press
to move to the previous point.
buttons. Press the button
can be used to switch
, the
to accept the
to move to the
to accept the
to move to the previous
Seite 19