Settings; New Setup; Language - IMKO SONO-VIEW Operating Instructions Manual

2017-05-24

4.4 Settings

Actuate the button
menu. Here, you are enabled to perform various settings and call up information regarding
the SONO-VIEW.
The setup menu features the following structure:
Setting Description

New Setup

Enables a new detection of connected probes

Language

Setting of the language
Display Contrast Setting of the display contrast
About SONO- Serial number and further information regarding your SONO-VIEW
VIEW
Info Support information
USB-IMP-Bridge Enables the comfortable configuration of your probes via PC
Set the desired setting using the buttons
subsequently enter the selected setting. Actuate the button
menu.
4.4.1 New Set-Up
See Section 4.1 „Initial and New Installation"
4.4.2 Language
The selection of the language is performed with the buttons
, the selected language is set as the standard language. To exit the menu item "Language",
actuate the button .
Manual SONO-VIEW Version 3_1
while the measurement display is active and you will reach the setup
/ . By actuating the button
again in order to exit the setup
/ . By actuating the button
, you can
Seite 11