Curtis CFB3 User Manual page 9

INSTALLATION INSTRUCTIONS
Set the Timer Clock for Initial Operation (some models)
NOTICE:
• Set the timer only with the main power switch in
the OFF (O) position.
• Turn the timer wheel only by hand and only in
the clockwise direction.
IMPORTANT: The unit may not operate as
desired if the timer clock is not set properly.
11 With the main power switch off, turn the outer wheel
on the timer clockwise until the correct time (AM or
PM) lines up with the arrow on the clock face.
12 Check to make sure that all of the timer tabs are
rotated to the "freeze" position (see diagram).
Power Up the Unit
WARNING: Connect the power cord to the
appropriate type and size electrical outlet. If the
electrical outlet is not compatible with the power
cord, have it upgraded by a licensed electrician.
Do not modify the power plug. Do not use an
extension cord.
13 Connect the power cord to the appropriate type of
electrical outlet.
14 Make sure that the circuit breaker supplying power to
the unit is on.
15 Turn ON (|) the main power switch.
16
time as instructed in the CLEANING INSTRUCTIONS
section. Verify that the unit is operating properly
according to the OPERATING INSTRUCTIONS
section.
Style varies
9
Turn outer wheel
clockwise to set
Front view
Main power
switch off
Make sure all timer
tabs are in "freeze"
position
12
AM/PM
arrow
3
6
Side view
II42
052218NC