TROUBLESHOOTING GUIDE
High Pressure/Temperature Light On
CFB2 and CFB3 only. Turn off the main power switch* and check the
following:
See Check for Proper Ventilation below.
1
2
If the light still comes on during operation, turn off the main
power switch and call for service.
* On units equipped with a temperature display, the system is
designed to reset itself automatically after the main power switch has
been off for 5 minutes.
Check for Proper Ventilation
1
(4 inches minimum on back and sides).
2
ventilation grills are not blocked or dirty. See the CLEANING INSTRUCTIONS section.
3
Make sure that the unit is not close to sources of heat that could affect proper operation (heaters, cooking grills,
etc.)
TG42
Light