Curtis CFB3 User Manual page 19

CLEANING INSTRUCTIONS
Replace Seals and Reassemble (cont.)
12 Install new auger seals on each
auger.
13 Using food grade lubricant,
lubricate the inside of each auger
seal.
14 Reinstall the augers. Rotate each
auger until it engages completely.
15 Install a new bowl seal on the back
of each bowl. The circular lip on the
on the seal.
16 Set the mixing bowls back in place.
Make sure that the lip on the bottom
of each bowl rests inside the front
trim on the top of the chassis.
17 Lubricate the tap mounting slots on
the front of each mixing bowl with
food grade lubricant.
18 Remove and discard the existing
tap seals from the tap handle
assemblies.
19 Install new tap seals.
continued...
FROZ BEV DISP, CLEANING INSTRUCTIONS
12
Groove
14
16
18
CI31
13
Lip
15
17
19
082418A