Curtis CFB3 User Manual page 12

OPERATING INSTRUCTIONS
Setting the Timer Clock (some models)
NOTICE
• Set the timer only with the main power switch in
the OFF (O) position.
• Turn the timer wheel only by hand and only in the
clockwise direction.
With the main power switch off, turn the outer wheel on
the timer clockwise until the correct time (AM or PM)
lines up with the arrow on the clock face (Figure 1).
2 Turn on the main power switch to start the clock.
IMPORTANT: The clock/timer is equipped with a
power cord is disconnected or the main power
switch is turned off for a longer period of time,
the clock will need to be reset when power is
restored.
Timer Operation (some models)
Use the timer to start the unit automatically. This feature
allows you to pour the mix in ahead of time and have the
frozen beverage ready to serve at the programmed time
(unattended operation). The timer determines when the
unit is in standby (night) mode or freeze mode. In standby
mode the mixture is kept cool, but does not freeze.
The unit comes from the factory set for manual (non-timer)
(see diagram, right), the timer is disabled and the unit will
freeze the mixture any time the refrigeration switch is set
to ON (|).
Setting Up the Timer
to the time marks on the timer to either the standby or
freeze position (Figure 2). The unit will operate in the
mode selected during the corresponding time period.
2 Check to make sure the clock is set to the current
time, then turn ON (|) the main power switch.
Main power
switch off
Style varies
Turn outer
wheel clock-
wise to set
12
9
6
Figure 1
Timer tabs
12
9 3
6
Figure 2
OI60
AM/PM
arrow
3
Timer tab in
"freeze" position
Timer tab
in stand-by
(night)
position
Timer
side view