Curtis CFB3 User Manual page 18

CLEANING INSTRUCTIONS
Preventive Maintenance (cont.)
Remove the Mixing Bowls and Lids
4 Remove the handle assemblies
from the bowl taps by pushing in
on the top of the handle with your
thumb while pulling up on the
5 Disconnect the lid light plugs from
the sockets behind the mixing
bowls.
6 Lift off the lids. Raise the front part
of each bowl to release. Remove
each bowl from its seat by pushing
and tapping lightly on the rear.
7 Pull the bowl seal off of the back of
each bowl and discard.
8 Pull forward on each auger to
remove it from the drum. Remove
and discard the auger seals.
Replace Seals and Reassemble
9 Using a pair of pliers, grasp the
outside of each drum bushing.
While rocking it back and forth, pull
out on the bushing, until it comes
free from the drum. Discard the
bushings.
10 Lubricate the inside of the new
bushings and the o-rings on the
outside with food grade lubricant.
11 Install the new bushings in place of
the old ones removed in step 9.
continued...
FROZ BEV DISP, CLEANING INSTRUCTIONS
Auger
seal
4
6
8
10
CI31
5
7
9
11
082418A