Print Speed - SATO M-5900RV Operator And Technical Reference Manual

Section 4. Programming Reference
Command Structure
<ESC>CSa
a = Designates the speed selection
See Note 2 for allowable settings
Example:
Placement:
Default:
Command Function
To specify a unique print speed through software for a particular label. This
allows flexibility in finding the best performance and quality for the particular
label format, media, and ribbon. All sebsequent labels will print at this speed
unless the speed is changed with this command or through the Operator
Panel.
Printer Input
<ESC>A
<ESC>CS5
<ESC>Z
Printer Output
There is no printer output for this command. It sets the print speed of the
printer.
Special Notes
1. This becomes the new setting in the printer configuration for all
subsequent print jobs unless changed. The setting is stored in non-
volatile memory and is not affected by cycling the power.
2. The allowable Print Speed settings are as follows:
Page 4-64

Print Speed

<ESC>CS5
Must be placed immediately after <ESC>A and immediately
before <ESC>Z in its own separate data stream.
As previously set in the printer configuration
C S C o m m a n
2
3
4
5
Default values are shown in bold type.
SATO M-5900RV Operator and Technical Reference Manual
d
" 2 s / 5 ( 0 m m / ) s
" 3 s / 7 ( 5 m m / ) s
" 4 s / 1 ( 0 0 m m / ) s
. 4 " 7 s / 1 ( 2 0 m m / ) s
PN 9001081
Rev. C