SATO M-5900RV Operator And Technical Reference Manual page 64

Section 3. Adjustments and Maintenance
3.4 Replacing the Print Head
NOTE: The print head contains a precision printing surface that must be
carefully protected from mechanical damage. Extreme care must be exercised
during handling and installing to prevent scratching, chipping, denting or
otherwise damaging the exposed substrate surface, particularly in the resistor
(printing element) area. A small clean piece of cardboard should be used to
protect the substrate during installation if there is a possibility of accidental
damage.
STEP PROCEDURE
Page 3-6 SATO M-5900RV Operator and Technical Reference Manual
Text Continued
on Page 3-8
PN 9001081
Rev. C