Graphics, Custom Store - SATO M-5900RV Operator And Technical Reference Manual

Section 4. Programming Reference
This command requires the Memory Card option.
Command Structure
<ESC>Glabbbcccddd{data}
a
bbb
ccc
ddd
{data}
Example:
Placement:
Default:
Command Function
To provide similar functionality to the <ESC>G Custom Graphic command (see Page
4-45), but allows for the graphic image to be stored in a Memory Card. Use the Store
command to send the graphic data to the printer, which is held in the optional memory
card even if printer power is lost.
Printer Input
<ESC>A
<ESC>CC1<ESC>GIH002002001
0100038007C00FE01FF03FF87FFCFFFE07C007C007C007C007C007C007C007C0
<ESC> Z
Note: See Appendix C for detailed explanation on how to format a graphics data
stream.
Printer Output
There is no printer output for this command. See <ESC>GR Recall Custom Graphics
command.
Page 4-90
Memory Card Function

Graphics, Custom Store

= Specifies character format of the data
H Hex data
B Binary data
= Number of horizontal 8 x 8 blocks (001-248)
= Number of vertical 8 x 8 blocks (001 -267)
= Graphics storage number (001-999)
= Hex or binary data to describe the graphic Image
See Appendix C for detailed information on creating Hex and Binary
graphic files.
Immediately following the <ESC>CC Slot Select command.
None
SATO M-5900RV Operator and Technical Reference Manual
PN 9001081
Rev. C