Storing The Incubator; Door Components; Electrical Components - Shel lab SMI2 Installation And Operation Manual

Smi incubator 100 – 120 voltage
Table of Contents

Advertisement

USER MAINTENANCE
S
I
TORING THE
NCUBATOR
Perform the following steps if the incubator will be out of use for more than 24 hours to prevent
microbiological contamination such as fungus or mold.
1.
Depower the incubator.
2. Disinfect and clean if required by your laboratory protocol, or if the chamber has been
exposed to pathogenic microorganisms.
3. Use a soft cloth to dry the chamber surfaces.
D
C
OOR
OMPONENTS
Periodically, inspect the door latch, trim, catch, and gaskets for signs of deterioration. Failure to
maintain the integrity of the door system shortens the life span of the incubator.
E
C
LECTRICAL
OMPONENTS
Electrical components do not require maintenance. If the incubator fails to operate as specified,
please contact your distributor or
Technical Support
for assistance.
27 |
P a g e

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SMI2 and is the answer not in the manual?

This manual is also suitable for:

Smi6Smi7Smi12Smi11

Table of Contents