Certifications, Approvals, Compliance, And Requirements; Wireless Approvals - Multitech SocketModem GSM Hardware Manual

Certifications, Approvals, Compliance, and
Requirements

Wireless Approvals

The Multi-Tech SocketModem is Industry and/or Carrier Approved as an End Product modem. When
integrated and used with an antenna system that was part of the Multi-Tech modem certification, no
additional approvals or certification are required (however, CDMA has a few exceptions) for the
device you develop as long as the following are met:
•
PTCRB Requirements:
The antenna system cannot be altered.
•
Model Identification:
IMPORTANT
When the wireless carrier asks you to provide the modem's model identification,
give the Multi-Tech wireless model identification, not the identification of the host
device.
See the label example below.
The Multi-Tech model identification allows the carrier to verify the modem as one of its
approved models.
This information is located on the modem's label.
Example:
The following is an example of Multi-Tech's wireless model identification:
MTSMC-G1 – Multi-Tech wireless GSM model identification.
The following is an example of what an end product label could look like. End
product includes an integrated GSM modem:
Host Device
Identification
Multi-Tech
Model
Identification
IMEI
(International
Mobile
Equipment
Identity)
•
Other Information the Wireless Carrier Asks You to Provide:
The modem's 15-character IMEI (International Mobile Equipment Identity) number printed
on the modem's label.
Multi-Tech Systems, Inc. SocketModem GSM Hardware Guide for Developers
Chapter 4 – Safety and Regulatory Compliance
18