Restriction Of The Use Of Hazardous Substances (Rohs) - Multitech SocketModem GSM Hardware Manual

Restriction of the Use of Hazardous Substances
(RoHS)
Multi-Tech Systems, Inc.
Certificate of Compliance
2002/95/EC
Multi-Tech Systems Inc. confirms that its embedded products now comply with the chemical concentration
limitations set forth in the directive 2002/95/EC of the European Parliament (Restriction Of the use of certain
Hazardous Substances in electrical and electronic equipment - RoHS)
These Multi-Tech Systems, Inc. products do not contain the following banned chemicals:
Lead, [Pb] < 1000 PPM
Mercury, [Hg] < 1000 PPM
Hexavalent Chromium, [Cr+6]
Cadmium, [Cd] < 100 PPM
Polybrominated Biphenyl, [PBB] < 1000 PPM
Polybrominated Diphenyl Ether, [PBDE] < 1000 PPM
Moisture Sensitivity Level (MSL) =1
Tin Whisker Growth = None detected
Maximum Soldering temperature = 260C (wave only)
Notes:
1. Lead usage in some components is exempted by the following RoHS annex; therefore, higher lead
concentration would be found in some modules (>1000ppm).
a.
b.
2. Moisture Sensitivity Level (MSL) – Analysis is based on the components/material used on the
board.
3. Tin Whisker Study was done per NEMI guidelines (Elevated temperature cycle of 60°C and non-
condensing relative humidity of 87% exposed to this environment for 1000 hours).
Multi-Tech Systems, Inc. SocketModem GSM Hardware Guide for Developers
< 1000 PPM
Lead in high melting temperature type solders (i.e., tin-lead solder alloys containing more
than 85% lead).
Lead in electronic ceramic parts (e.g., piezoelectronic devices).
Chapter 4 – Safety and Regulatory Compliance
21