Table of Contents
Advertisement
9. GEIGER Powertronic
The GEIGER Powertronic enables the user to change the motor's closing characteris-
tics. The user can raise or reduce the closing power applied through the motor. This
way, he or she influences the closing characteristics of the casing. A rise in the closing
power causes a tighter closing of the casing with increased stress on the fabric; a
reduction in the closing power causes a looser closing and less strain to the fabric.
Closing power levels:
GEIGER-delivery setting:
I
Caution: By manually raising the closing power (e.g. from level 0 to
level 3) the fabric endures more strain.
In which situations is the GEIGER Powertronic applied?
• If the casing does not completely close.
• If the closing operation should be optimised for better fabric protection.
When can the GEIGER Powertronic be applied?
• Anytime; this function can be activated during initial operation, as well as at a
later date.
Which resources are necessary?
• GEIGER setting cable M56K144 (D), M56F150 (CH) or M56F151 (D with service
terminal)
Please note:
• The stop positions are not affected when the GEIGER Powertronic is activated.
• The selected power level is not affected when the end stop positions are changed
• Only activate the GEIGER Powertronic after the stop positions have been
taught-in and a complete reference run has been conducted.
GEIGER Powertronic – changing the power levels
Connect the setting cable to the connecting cable of the motor. When doing so,
take care to ensure that the colours of the different leads do tally with each other.
Then connect the setting cable to the 230V mains.
Activating the GEIGER Powertronic
Press the programming key about 8 seconds until the LED blinks 3 x, then release
EN
the programming key.
Changing the power levels
The motor is delivered with the power level 0. In order to increase the force press
key 2. Press key at least 2 seconds and stop at least 2 seconds. In order to
reduce the force press key 1. In order to store the selected level, press shortly the
programming key – the LED lights up. The adjustment process is finished.
8
EN
from level 0 to level 7
level 0
Gerhard Geiger GmbH & Co. KG | 100W0597
en
V000
0818
Advertisement
Table of Contents
