Table of Contents
Advertisement
Adjusting the Upper End Position
From far range, press the up or down button
and hold approx. 3 seconds until the installation
retracts and locks.
As soon as the upper end position is reached,
the motor automatically turns off and the upper
end position is saved. You will hear the motor (1 x
'Click-Click'). The up and down buttons are now
assigned to the corresponding turning direction of
the motors!
The learning mode is now concluded.
I
Finally, conduct at least one trial run,
so that the motor electronics can
automatically detect the threshold of the torque disconnection.
9. Side awnings operation
After the tensioning of the cloth on the outer end position retract the awning until
the motor disconnects via torque recognition.
A perfect tensioning of the cloth is thus ensured.
10. GEIGER-Powertronic
The GEIGER-Powertronic enables the user to change the motor's closing charac-
teristics. The user can raise or reduce the closing power applied through the motor.
This way, he or she influences the closing characteristics of the casing. A rise in the
closing power causes a tighter closing of the casing with increased stress on the
fabric; a reduction in the closing power causes a looser closing and less strain to
the fabric.
Closing power levels:
GEIGER-delivery setting:
I
Caution: By manually raising the closing power (e.g. from level 0 to
level 7) the fabric endures more strain.
In which situations is the GEIGER-Powertronic applied?
• If the closing operation should be optimised for better fabric protection.
When can the GEIGER-Powertronic be applied?
• Anytime; this function can be activated during initial operation, as well as at a
later date.
Which resources are necessary?
• GEIGER-hand-held remote, which is taught-in in accordance with Chapter 7
(page 7).
Please note:
• The end positions are not affected when the GEIGER-Powertronic is activated.
• Only activate the GEIGER-Powertronic after the end positions have been taught-
in and a complete trial has been conducted.
www.geiger.de
from level 0 to level 7
level 0
click-
1 x
click
min.
1,5 m
or
approx.3 sec.
EN
9
EN
Advertisement
Table of Contents
