Switch Between View Options; Additional View Options; Baro Mode (Ts110/Ts130 Only); Set Sea-Level Pressure - Oregon Scientific TS1X0 series User Manual

ADDITIONAL VIEW OPTIONS

While viewing the ALTI/Clock display,
press FUN/SET to switch between ad-
ditional view options: max and TOTAL -
TTL (accumulated) ascending altitude
(press SELECT/+ to show max and
accumulated descending altitude), alti-
tude alarm, current vertical speed and
clock (use SELECT/+ to show current vertical speed and
stopwatch), and max vertical speed (press SELECT/+ for max
descending speed).
To clear a value from the memory, press and hold FUN/SET for
2 seconds.

BARO MODE (TS110/TS130 ONLY)

A unique feature of the TS110/ TS130 BARO Mode is that
it enables you to view sea level pressure history for the
past 24 hrs.
SET THE SEA-LEVEL PRESSURE
Sea level pressure can change relative to location. To achieve
accurate altitude readings, set the sea-level pressure value
before every trip. Check the newspaper, local news station,
trail marker, or weather forecast for local readings, and always
select the reading nearest to your present location.
Diagram
13
Instructions
1. While in BARO Mode, press FUN/SET until the
SEA (sea pressure) screen is shown.
2. Use SELECT/+ or ST/SP/- to change the value.
The value will change in increments of 1 hPa or
.03 inHg, depending on the watch you purchased.
3. Press FUN/SET again when finished.