Switch Between Modes; Switch Between Mode Options; Change Setting Values; Use The Hi-Glo Backlight - Oregon Scientific TS1X0 series User Manual

Change the battery whenever the sensor does not perform as
expected.
NOTE
Used batteries can be harmful to the environment, and
should not be thrown out with household rubbish. Contact your
local waste disposal authority for instructions on how to dispose
of used batteries. Protect the environment by taking exhausted
batteries to authorized disposal stations.

SWITCH BETWEEN MODES

Press the MODE button to switch between the Modes:
TS110 — CLOCK, ALTIMETER, BAROMETER, BIKE, and
PC
TS120 — CLOCK, PULSE (Heart Rate), BIKE, and PC
TS130 — CLOCK, ALTIMETER, BAROMETER, PULSE,
BIKE, and PC
A status bar the appropriate mode on the LCD display when it
is selected.

SWITCH BETWEEN MODE OPTIONS

Press SELECT/+ to switch between the options within a Mode.

CHANGE SETTING VALUES

Press and hold FUN/SET for 2 seconds to enter setting mode.
Then, press ST/SP/- or SELECT/+ to change the value. Press
FUN/SET to switch between options, and to confirm the changes
when you are done.

USE THE HI-GLO BACKLIGHT

Press MARKER/LIGHT to turn on the HI-GLO backlight on for
five seconds. Once the light is on, press any key to keep it on
for a further five seconds.
In order to save power the light will not work when the battery
is low. If this happens, change the battery as soon as possible.

KEY LOCK

The watch also has a key lock function to stop the buttons from
being accidentally pressed during an activity. To activate it
simply press and hold SELECT/+ until the status bar blinks. The
function keys are now useless. To reactivate them, press and
hold SELECT/+ again until the status bar stops blinking.
The alarm will still go off while the Key Lock is activated.
NOTE
Pressing any key while in Key lock will stop the alarm.

HANDLING THE PRODUCT

The watch is designed to withstand a wide range of sports
activities, and comes complete with a strong wristband. When
riding, make sure the watch is firmly connected to the bike
mount, and connect all bicycle equipment carefully and se-
curely. See the BIKE Mode section (
8
20) for instructions.