Start Exercising; View Record During Hiking; View Record After Hiking - Oregon Scientific SE900 User Manual

START EXERCISING

With your desired profile downloaded onto the watch, you can start exercising and review exercise data records on the watch or uploading them to the application, which
can systematically manage and analyze your records.
IMPORTANT You need to pair sensor with the watch if necessary before starting exercising, such as paring a bike pod for cycling. If without pairing, the exercise profile
does not work to collect data.
HIKING PROFILE
You can use hiking profile to setup and monitor different values, such as distance, altitude and sea level pressure, etc. The setup mainly includes the following parts:
Altitude
•
• Sea level
SETUP
You need to input the value of altitude and sea level before starting hiking. You could browse your local weather station website for details of your living area or particular city.
Altitude and sea level setup:
1. In HIKING mode, press top (1) button to enter setup mode.
2. Toggle middle (2) button to set for altitude and its measurement unit (m or ft) and sea level and its measurement unit (inHg or hPa).
3. Press top (1) button to increase value or select option; press bottom (3) button to decrease value or select option.

VIEW RECORD DURING HIKING

You could view different monitored values, such as current altitude, altitude difference, local pressure, sea level pressure and so on. Maximum 10 time logs can be recorded.
Altitude and sea level setup:
1. In HIKING mode, press top (1) button to enter setup mode.
2. Press top (1) button again while starting your hiking. Altitude of your location and time log display. Press top (1) button again to stop the time counting.
OR
Press and hold top (1) button to reset the time to be 0:00'00.
3. Toggle middle (2) button to view several other screens and data.
Altitude of your current standing location and altitude difference
•
Local pressure and sea level pressure
•
Local pressure and current time
•
4. Press bottom (3) button to exit.

VIEW RECORD AFTER HIKING

You could view the records after hiking. The record in log form is ordered by date and time.
To view log:
1. In HIKING mode, press bottom (3) button to enter memory mode.You will see the total number of free time logs, date and time.
2. Toggle middle (2) button to select the desired record.
3. Press top (1) button to enter.
4. Toggle middle (2) button to view accumulated time of hiking, a chart representing your altitude display, ascended altitude, descended altitude display and the maximum
hiking altitude displays.
5. Press bottom (3) button to exit.
2