Timer; Temperature Display (Ts110 / Ts130 Only); Alti Mode (Ts110 / Ts130 Only) - Oregon Scientific TS1X0 series User Manual

The Timer works in CLOCK, ALTI,
PULSE, and BIKE Modes. From any of
these Modes, press SELECT/+ to dis-
play the stopwatch. Press ST/SP/- to
reset the Stopwatch, then:
• Press and hold FUN/SET for 2 sec-
onds. The display will change to
TMR.
• Press ST/SP/- or SELECT/+ to change a value.
• Press FUN/SET to switch between values and accept
changes.
• Press ST/SP/- to start or stop the timer.
• With the timer stopped, press ST/SP/- again to reset.
NOTE
You can switch to other Modes while running the timer
in the background.
NOTE
To return to STW Mode, you must reset all the timer
values to 0. The timer automatically switches to STW Mode
when it reaches 0.

TIMER

TEMPERATURE DISPLAY
(TS110 & TS130 ONLY)
The Temperature can be displayed in
CLOCK, ALTI, and BARO Modes. From
any of these Modes, press SELECT/+
to display the Temperature. The Tem-
perature shows in either Celsius or
Fahrenheit only, depending on the
watch version you purchased.
NOTE
Your wrist temperature may affect the reading, particu-
larly during exercise. Take off the watch and leave it for 15
minutes to get the most accurate reading.

ALTI MODE (TS110 / TS130 ONLY)

The OUTBREAKER sports watch in-
cludes a barometer that distinguishes
between pressure caused by altitude
changes and pressure caused by
weather conditions. This technology
reduces discrepancies in readings and
makes the altimeter more accurate than
most average devices.
The watch can store and recall the following values:
• Current altitude
• Maximum / minimum altitudes attained during your a trip
10