View Sea-Level Pressure; Weather Forecast; Tour Mode; Tour Memory - Oregon Scientific TS1X0 series User Manual

VIEW THE SEA-LEVEL PRESSURE
To view a graphical image of the sea level
pressure (for the current 14 hours), press
FUN/SET with the SEA screen shown in
BARO Mode. Press SELECT/+ to view
sea pressure history for –1h (last hour) up
to –24h, then press FUN/SET again to
view the reading.

WEATHER FORECAST

The built-in barometer helps to forecast the weather for the next
12-24 hours. This reading is based on barometric pressure
changes and has an effective range of 30 to 50 kilometers
(18 – 31 miles). The patented baro-compensation technology
in the OUTBREAKER watch allows it to differentiate between
pressure changes due to altitude, and those due to weather
changes. To avoid inaccurate forecasts, the watch will favor
altitude readings when you are actually ascending or descend-
ing. This means the weather icon will disappear after significant
vertical movements. To display an accurate forecast, simply
remain at any fixed altitude for roughly 5 minutes.
The forecast will be displayed at the top of the watch as one of
these four icons:
NOTE
When functioning normally the watch automatically
updates the forecast every 15 minutes.

TOUR MODE

There are two ways of using the memory on the OUTBREAKER.
First, the watch computer will record information as you train,
for display only. This means you can check the information
during or after your exercise, but there will be no record once
you clear the memory in preparation for your next training
event.
To record and store this information (for up to 99 different trips,
depending on the size of each record – see below) you must
activate the TOUR Mode and view the records through the PC
software.
NOTE The information from a TOUR can only be viewed
through the PC software.
NOTE
You cannot change the date or time during TOUR
Mode.

TOUR MEMORY

TOUR Mode allows you to record and store data displayed on
the watch, which can then be downloaded onto your PC. Up to
99 TOURs can be recorded and stored to the PC software.
Depending on the model you purchase, the information you
choose to record (see below), and the time used by TOURs you
have already stored on the watch, the available memory length
may vary. The average memory storage capacities in real-
time, (taking a data sample every 5 seconds), assuming default
settings (see Specifications: TOUR Mode) and no TOURs have
been saved for each model are as follows:
14