Video System Selection - Sanyo LC-XBL20 Owner's Manual

Video Input

Video System Selection

Press the MENU button to display the On-Screen
1
Menu. Use the Point
then press the Point
Select Video or Computer 1.
2
(See pages 36-37 for selecting S-video or
Component.)
Use the Point
▲▼
3
press the Point
buttons to select the desired system and then
▲▼
press the SELECT button.
Video or S-video
Auto
The projector automatically detects an incoming video
system, and adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select the system
manually.
PAL/SECAM/NTSC/NTSC4 .43/PAL-M/PAL-N
If the projector cannot reproduce proper video image,
select a specific broadcast signal format from among PAL,
SECAM, NTSC, NTSC 4 .43, PAL-M, and PAL-N.
Component
Auto
The projector automatically detects an incoming video
signal, and adjusts itself to optimize its performance.
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce proper video image, select
a specific component video signal format from among 480i,
575i, 480p, 575p, 720p, 1035i, and 1080i.
Note:
The AV System Menu cannot be selected when selecting
RGB (Scart).
38
buttons to select Input and
▲▼
► or the SELECT button.
buttons to select System and then
or the SELECT button. Use the Point
►
AV System Menu (Video or S-video)
System Video
AV System Menu (Component)
Component