Input Source Selection (Computer 2: Rgb); Direct Operation; Menu Operation - Sanyo PLC WXU700A Owner's Manual

Input Source Selection (Computer : RGB)

Direct Operation

Choose Computer  by pressing the INPUT button on the top control or press the COMPUTER button on the
remote control.
Before using these buttons, correct input source should be selected through Menu operation as described
below.
INPUT button
Top Control
COMPUTER  can not be selected when using the COMPUTER IN 2/

MONITOR OUT terminal as MONITOR OUT output.

Menu Operation

1
Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point
►

Use the Point buttons to select Computer  and
▲▼
then press the SELECT button.
3
When Computer  is selected, analog RGB input
source will be selected directly.
Note:

When the Input Search function is set to On1 or On,
the input signal will be searched automatically (p.48).
Computer 1
Computer 

HDMI
Video
S-video
Network
buttons to select Input and
▲▼
or the SELECT button.
Remote Control
COMPUTER button
Input Menu
Computer Input
Computer 1
Computer 

31