Sanyo PLC WXU700A Owner's Manual page 45

Sharpness
Press the Point button to decrease the sharpness of the
◄
image; press the Point button to increase the sharpness
►
of the image (from 0 to 15).
Gamma
Use the Point buttons to adjust the gamma value to
◄►
obtain a better balance of contrast (from 0 to 15).
Noise reduction
Noise interference on the screen can be reduced. Select
one of the following options to get smoother images.
Off ......... Disabled.
L1 .......... Lower reduction.
L .......... Higher reduction.
Progressive
An interlaced video signal can be displayed in progressive
mode. Select one of the following options.
Off ......... Disabled.
L1 .......... For an active picture.
L .......... For a still picture.
Film ....... For watching a film. With this function, the
projector reproduces pictures faithful to the
original film quality.
Reset
To reset the adjusted data, select Reset and press the Point
or the SELECT button. A confirmation box appears and
►
then select yes. All adjustments will return to their previous
figures.
Store
To store the adjusted data, select Store and press the
SELECT button. Use the Point
from Images 1 to 4 and press the SELECT button.
A confirmation box appears and then select yes. Stored
data can be called up by selecting an Image (1-4) in the
Image Mode Selection on page 43.
Note:
Noise reduction and Progressive cannot be selected
when 480p, 575p, 70p, 1035i or 1080i is selected
(p.42).
buttons to select one
▲▼
Store Menu
A confirmation box
appears and then
select yes.
Video Input
45