Sanyo PLC WXU700A Owner's Manual page 60

Setting
Enter a PIN code
Use the Point
▲▼
Point button to fix the number and move the red frame
►
pointer to the next box. The number changes to
you fixed an incorrect number, use the Point
move the pointer to the number you want to correct, and
then enter the correct number.
Repeat this step to complete entering a four-digit
number.
After entering the four-digit number, move the pointer to
Set. Press the SELECT button so that you can start to
operate the projector.
If you entered an incorrect PIN code, PIN code and the
number (

correct PIN code all over again.
Change the PIN code lock setting
Use the Point
▲▼
Press the SELECT button to close the dialog box.
PIN code change
The PIN code can be changed to your desired four-
digit number. Press the Point
code change and press the SELECT button. The New
PIN code input dialog box appears. Set a new PIN code.
CAUTION:
WHEN yOU HAVE CHANGED THE PIN CODE, WRITE
DOWN THE NEW PIN CODE IN COLUMN OF THE
PIN CODE NO . MEMO ON PAGE 83, AND KEEP IT
SECURELy . IF yOU FORGET yOUR PIN CODE, THE
PROjECTOR CAN NO LONGER BE STARTED .
60
buttons to enter a number. Press the
) will turn red for a moment. Enter the
buttons to select Off, On1 or On.
button to select PIN
▼
Enter a PIN code
. If

button to
◄
Change the PIN code
Off