Rear Terminal; Remote Control - Sanyo PLC WXU700A Owner's Manual

Sanyo projector user manual
Hide thumbs Also See for PLC WXU700A:
Table of Contents

Advertisement

Part Names and Functions

Rear Terminal

① R/C jACK
When using the wired remote control, connect
the wired remote control to this jack with a remote
control cable (not supplied).
② USB Connector (Series B)
In order to operate the computer with the remote
control and use the PAGE
remote control during a presentation, connect the
USB port of the computer to the USB terminal with a
USB cable (not supplied) (p.17).
③ CONTROL PORT
When controlling the projector with RS-232C,
connect the control equipment to this connector with
the serial control cable.
④ COMPUTER IN 1 / COMPONENT IN
Connect output signal from a computer, RGB scart
21-pin video output or component video output to
this terminal (pp.17,19).
⑤ COMPUTER IN  / MONITOR OUT
– Connect computer output to this terminal (p.17).
– This terminal can be used to output the incoming
analog RGB signal and component signals from
COMPUTER IN 1/COMPONENT IN terminal to the
other monitor (p.17).
⑥ HDMI
Connect the HDMI signal (including sound signal)
from video equipment or the DVI signal from
computer to this terminal (pp.17, 19).
⑦ LAN Connection Terminal
Connect the LAN cable (refer to the owner's manual
of "Network Set-up and Operation").
10
*
buttons on the
▲▼
⑧ USB Connector (Series A)
Connect the USB menory (refer to the owner's
manual "Network Set-up and Operation").
⑨ S-VIDEO IN
Connect the S-VIDEO output signal from video
equipment to this jack (p.18).
⑩ AUDIO OUT (VARIABLE)
Connect an external audio amplifier to this jack
(pp.17-19).
This terminal outputs sound from AUDIO IN terminal
(⑪ or ⑫).
⑪ COMPUTER 1 COMPONENT / COMPUTER 
AUDIO IN
Connect the audio output (stereo) from a
computer or video equipment connected to ④,
⑤ or ⑥ to this jack. (pp17, 19)
⑫ AUDIO IN
Connect the audio output signal from video
equipment connected to ⑨ or ⑬ to this jack.
For a mono audio signal (a single audio jack),
connect it to the L (MONO) jack (p.18).
⑬ VIDEO IN
Connect the composite video output signal to
this jack (p.18).
is registered trademarks of HDMI
*
Licensing, LLC.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents