Menu Bar - Sanyo PLC WXU700A Owner's Manual

Menu Bar

For detailed functions of each menu, see "Menu Tree" on pages 73-74.
Main Menu










 Input
Used to select an input source from Computer 1, Computer , HDMI, Video, S-video or Network
 PC adjust
Select Fine sync, Total dots, Horizontal, Vertical, Clamp, Display area H and Display area V to adjust the
parameters to match with the PC input signal format (p.32-35).
 Image select
For computer source, used to select an image mode among Dynamic, Standard, Real, Blackboard(Green), Colorboard
and image 1 - 4 (p.36).
For HDMI or Video source, used to select an image mode among Dynamic, Standard, Cinema, Blackboard(Green) ,
Colorboard and Image 1- 4 (p.43).
 Image adjust
For computer source, used to adjust computer image [Contrast, Brightness, Color temp ., White balance (R/G/B),
Sharpness and Gamma] (pp.37-38).
For HDMI or Video source, used to adjust picture image [Contrast, Brightness, Color, Tint, Color temp ., White
balance (R/G/B), Sharpness, Gamma, Noise reduction and Progressive] (pp.44-45).
 Screen
For computer source, used to adjust size of the image [ Normal, True, Full, Custom and Digital zoom +/–] (pp.38-39).
For HDMI or Video source, used to set size of image [Normal, Full, Zoom, Wide , Natural wide and Custom] (p.46).
 Sound
Used to adjust the volume or mute the sound (p.27).
 Setting
Used to set the projector's operating configurations (pp.47-62).
 Information
Display the input source information: Input , H-sync freq ., V-sync freq ., Screen, Language, Lamp status, Lamp
counter, Power management, Key lock, PIN code lock and Remote control (p.63).
 Network
See the owner's manual of "Network Set-up and Operation".
 Guide
The key operation is displayed.
Sub-Menu
Basic Operation
(pp.30-31,40-41).
5