Computer Input; Input Source Selection (Computer 1: Rgb) - Sanyo PLC-WL2503 Owner's Manual

Computer Input

Choose Computer 1(RGB) by pressing the COMPUTER 1
button on the remote control or press the INPUT button on
the top control.
Before using these buttons, correct input source should be
selected through Menu operation as described below.
Top Control
INPUT button
COMPUTER 2 can not be selected when using the
*
COMPUTER IN 2/ MONITOR OUT terminal as MONITOR
OUT output.
1
Press the MENU button to display the On-Screen
Menu. Use the Point ▲
then press the Point
2
Use the Point ▲
3
When Computer 1 is selected, press the Point
access the submenu items. Use the Point ▲
to select the RGB input source and then press the
SELECT button.
Note:
When the Input Search function is set to On 1 or On 2 in
the Auto setup function, the input signal will be searched
automatically (p.45).
Downloaded From projector-manual.com Sanyo Manuals

Input Source Selection (Computer 1: RGB)

Direct Operation
Computer 1
Computer 2 *
Menu Operation
buttons to select Input and
▼
or the SELECT button.
►
buttons to select Computer 1.
▼
Remote Control
HDMI
Input Menu
Video
S-video
to
►
buttons
▼
Computer
HDMI
COMPUTER 1 button
Computer 1(RGB)
ASPECT
Computer 1(Scart)
1
27