Turning Off The Projector - Sanyo PLC WXU700A Owner's Manual

Turning Off the Projector

1
Press the ON/STAND-BY button on the top control or
on the remote control, and Power off? appears on the
screen.

Press the ON/STAND-BY button again to turn off the
projector. The POWER indicator starts to blink red, and
the cooling fans keep running (You can select the level
of fans' quietness and speed. See "Fan" on page 61.).
At this time, you can unplug the AC power cord even if
the fans are still running.
3
When the projector has cooled down enough, the
POWER indicator stops blinking and you can turn on
the projector.
TO MAINTAIN THE LIFE OF THE LAMP, ONCE
YOU TURN THE PROJECTOR ON, WAIT AT
LEAST FIVE MINUTES BEFORE TURNING IT
OFF.
DO NOT OPERATE THE PROJECTOR
CONTINUOUSLY WITHOUT REST. CONTINUOUS
USE MAY RESULT IN SHORTENING THE LAMP
LIFE. TURN OFF THE PROJECTOR AND LET
STAND FOR ABOUT AN HOUR IN EVERY 24
HOURS.
Note:
• When the On start function is set to On, the projector
will be turned on automatically by connecting the AC
power cord to an AC outlet (p.57).
• The running speed of cooling fans is changed according
to the temperature inside the projector.
• Do not put the projector in a case before the projector is
cooled enough.
• If the WARNING indicator blinks or lights red, see
"WARNING indicator" on page 64.
• While the POWER indicator is blinking, the lamp is
being cooled down and the projector cannot be turned
on. Wait until the POWER indicator stops blinking to turn
on the projector again.
• The fan rotation will terminate directly if the AC power
cord is unplugged immediately after the projector is
turned off.
• The projector can be turned on after the POWER
indicator turns red. The waiting time to restart will be
shortened when the normal power-off processing for fan
cooling is completed, compared with the time the AC
power cord is immediately unplugged after the power-
off.
Power off? disappears after 4 seconds.
Basic Operation
3