Table of Contents
Advertisement
Adjusting the Time and Day
Setting
1.
Pull out the crown to the second click.
The second hand will point to the currently
selected time zone.
The mode hand will point to the summer
●
time setting for the currently selected
Home City.
Time zone
Summer time setting
2.
Hold down (C) for about one second.
This causes the second hand to move to
12 o'clock, and enables the minute setting
operation.
3.
Rotate the crown to change the minute
setting.
4.
Press (C).
The hour hand will move slightly,
indicating that the hour setting operation
is enabled.
5.
Rotate the crown to change the hour
setting.
6.
Press (C).
This enables the year ten's digit setting
operation.
7.
Rotate the crown to move the second
hand to the desired setting for the year
ten's digit.
Year (10's digit)
00
10
90
80
70
50
60
8.
Press (C).
This enables the year one's digit setting
operation.
Operation Guide 5526
9.
Rotate the crown to move the second
hand to the desired setting for the year
one's digit.
10.
Press (C).
This changes to the month setting
operation.
Crown
Crown
11.
Rotate the crown to change the month.
12.
Press (C).
The mode hand will move slightly,
indicating that the day setting operation is
enabled.
Changing the day setting will cause the
●
mode hand to rotate repeatedly.
Hand and Day Indicator Movement
l
13.
Rotate the crown to change the day.
14.
On a time signal at the top of a minute,
20
push the crown back in.
30
Note
40
If the watch does not indicate the
●
correct time even after you adjust it,
adjust the hand and day indicator
positions.
Using MR-G Connected to Make
l
Adjustments
Using Watch Operations to Make
l
Adjustments
Year (one's digit)
0
1
2
9
3
8
4
7
5
6
12
11
1
10
2
9
3
8
4
7
5
6
Month
Day
Configuring the Summer
Time Setting (Home City)
The watch's current time setting can be
change to summer time when required.
[STD]: The watch always indicates standard
time.
[DST]: The watch always indicates summer
time.
Important!
If the Home City time zone is an area
●
where time calibration signal
reception is possible, you can select
[AT] (Auto) for the summer time
setting. While [AT] is specified as the
summer time setting, the first time
calibration signal receive operation
after the Home City enters the
summer time period will cause the
watch's time setting to switch to
summer time. The first time
calibration signal receive operation
after the end of the summer time
period is reached will cause the
watch's time setting to switch to
standard time.
For information about areas where
time calibration signals can be
received, go to the section below.
City (Time Zone) List
l
1.
Pull out the crown to the second click.
The second hand will point to the currently
selected time zone.
The mode hand will point to the summer
●
time setting for the currently selected
Home City.
2.
Hold down (A) for about one second.
Each time you hold down (A) for about one
second, the summer time setting will cycle
to the next available option.
3.
Push the crown back in to its normal
position.
12
Advertisement
Table of Contents
