Summer Time; Adjusting The Time And Day Setting - Casio Oceanus OCW-G1000 Operation Manual

1.
Pull out the crown to the second click.
The second hand will move to the
currently selected time zone.
Time zone
2.
Rotate the crown to change the time zone.
You can also select a time zone whose
●
name is not indicated on the face of the
watch.
For information about time zones, see
●
the "City (Time Zone) List".
3.
Hold down (A) for about one second to
change the summer time setting.
Each press of (A) cycles through
●
available settings in the sequence
shown below.
"AT (AUTO)" n "STD" n "DST"
"AT (AUTO)"
●
The watch switches between standard
time and summer time automatically.
"STD"
●
The watch always indicates standard
time.
"DST"
●
The watch always indicates summer
time.
4.
Push the crown back in to its normal
position.

Summer Time

Summer time, which is also known as Daylight
Saving Time (DST), advances the time setting
one hour, 30 minutes, or some other amount
of time from standard time (STD) during the
summer months. Whether or not and how
summer time is used depends on your country
or local area. Summer time is not used in some
countries and local areas.
Operation Guide 5412
Adjusting the Time and Day
Setting
1. Pull out the crown to the second click.
The second hand will move to the
currently selected time zone.
Crown
2. Hold down (C) for about 10 seconds.
This causes the second hand to move to
12 o'clock and enables the hour and
minute setting operation.
3. Rotate the crown to adjust the hour and
minute settings.
4.
Press (C).
This enables the year 10's digit setting
operation.
Year (10's digit)
90
5. Rotate the crown to move the second
hand to the desired setting for the year
ten's digit.
6. Press (C).
This enables the year one's digit setting
operation.
7.
Rotate the crown to move the second
hand to the desired setting for the year
one's digit.
Hours Minutes
Crown
Time zone
00
10
20
＋
30
−
80 40
70
50
60
0
1
2
＋
9
3
−
8
4
7 5
6
Year (1's digit)
8.
Press (C).
This changes to the month setting
operation.
12
11 1
10
9
8
7 5
6
Month
9. Rotate the crown to change the month.
10.
Press (C).
This changes to the day setting operation.
Day
11. Rotate the crown to change the day.
12. On a time signal at the top of a minute,
push the crown back in.
2
＋
3
−
4
＋
−
8