Download Print this page

Using The Crown; Hand And Day Indicator Movement - Casio 5526 Operation Manual

Hide thumbs

Advertisement

Table of Contents
Stopwatch Mode
The main hour and minute hands indicate the
current time.
The second hand, and the small hour and
minute hands indicate the elapsed stopwatch
time.
Start/Stop
Reset
A Current location time (24-hour time)
One revolution every 24 hours.
B Stopwatch seconds
C Stopwatch hours
D Stopwatch minutes
E Stopwatch hours (24-hour time)
The hand points to the A-side for hours 0
through 12, and to the P-side for hours 12
through 24.
Timer Mode
The main hour and minute hands indicate the
current time.
The second hand, and the small hour and
minute hands indicate the current countdown
time.
Start/Stop
Reset
A Current location time (24-hour time)
One revolution every 24 hours.
B Timer seconds
C Timer hours
D Timer minutes
E Timer hours (24-hour time)
The hand points to the A-side for hours 0
through 12, and to the P-side for hours 12
through 24.
Operation Guide 5526
Alarm Mode
The main hour and minute hands indicate the
current time.
The small hour and minute hands indicate the
alarm time.
The second hand indicates the alarm enabled/
disabled setting.
A Current location time (24-hour time)
One revolution every 24 hours.
B Alarm enabled/disabled
C Alarm hour
D Alarm minute
E Alarm hour (24-hour time)
The hand points to the A-side for a.m. times,
and to the P-side for p.m. times.

Using the Crown

The watch's crown is a screw-in (screw lock)
type. To use the crown, you first need to rotate
it towards you (leftwards) to loosen it.
Important!
To prevent loss of water resistance
and/or damage due to impact, be
sure to push the crown in to its
normal position after you are
finished using it.
When pushing the crown back in,
take care not to apply too much
force.
Enabling/
Disabling the
④ ⑤
Alarm
Crown
Loosen
Fast Forward/Fast Reverse
Crown
Normal timekeeping
Second click
First click
After pulling out the crown to the first or second
click, rotating it quickly in succession in either
direction will start a fast forward or fast reverse
operation. While a fast forward operation is in
progress, quickly rotating the crown in
succession again will increase the speed even
further.
Stopping Fast Forward/Fast Reverse
Rotate the crown in the direction opposite that
of the ongoing operation or press any button.
Note
If you do not perform any operation
for about two minutes after pulling
out the crown, crown operations will
automatically become disabled. If
that happens, push the crown back
in and then pull it out again.
Hand and Day Indicator
Movement
Mode hand
Day indicator
Mode Hand and Day Indicator
Movement
Changing the day setting of the watch will also
cause the mode hand to move.
Day
It can take anywhere from about 10 to 40
seconds for the day indicator to change after
timekeeping reaches midnight. The mode
hand moves as the day indicator changes.
The day may not be indicated correctly while
the watch's crown is pulled out.
3

Advertisement

Table of Contents
loading