Summer Time; Adjusting The Time And Day Setting; Adjusting Hand And Day Indicator Alignment - Casio 5412 Operation Manual

Summer Time

Summer time, which is also known as
Daylight Saving Time (DST), advances
the time setting one hour, 30 minutes, or
some other amount of time from standard
time (STD) during the summer months.
Whether or not and how summer time is
used depends on your country or local
area. Summer time is not used in some
countries and local areas.
Adjusting the Time and Day
Setting
1. Pull out the crown to the second click.
The second hand will move to the
currently selected time zone.
Hours Minutes
Time zone
2. Hold down (C) for about 10 seconds.
This causes the second hand to
move to 12 o'clock and enables the
hour and minute setting operation.
3. Rotate the crown to adjust the hour
and minute settings.
4. Press (C).
This enables the year 10's digit
setting operation.
Year (10's digit)
5. Rotate the crown to move the second
hand to the desired setting for the
year ten's digit.
Operation Guide 5412
6. Press (C).
This enables the year one's digit
setting operation.
7. Rotate the crown to move the second
hand to the desired setting for the
year one's digit.
8. Press (C).
This changes to the month setting
operation.
Crown
9. Rotate the crown to change the
month.
10. Press (C).
This changes to the day setting
operation.
11. Rotate the crown to change the day.
12. On a time signal at the top of a
minute, push the crown back in.
Year (1's digit)
Month
Day
Adjusting Hand and Day
Indicator Alignment
Strong magnetism or impact can cause
the time indicated by the hands and the
day indicator to go out of alignment. If this
happens, adjust hand and day indicator
alignment.
The watch performs alignment of the
●
hour hand, minute hand, second hand,
and 24-hour hand automatically.
Adjusting Hand and Day
Indicator Alignment
1. Pull out the crown to the second click.
2. Hold down (B) for about five
seconds, until the second hand
moves to 12 o'clock.
This will start auto alignment of the
hour hand, minute hand, second
hand, and 24-hour hand.
After auto alignment is complete,
●
the hands should be in the
positions shown below.
Hour hand
Minute hand
Second
hand
24-hour
hand
If the 24-hour hand is off by 12
●
hours, hold down (A) for about two
seconds. The 24-hour hand will
move to 12 o'clock.
Crown
9