Stopwatch; Measuring Elapsed Time; Timer; Setting The Timer Start Time - Casio 5526 Operation Manual

Stopwatch

The stopwatch measures elapsed time in units
of one second up to 23 hours, 59 minutes, 59
seconds (24 hours).
Getting Ready
Enter the Stopwatch Mode.
Navigating Between Modes
l

Measuring Elapsed Time

Seconds
Hour (24-hour time)
Minutes
Hours
1.
Use the operations below to measure
elapsed time.
A
Start
A
Stop
A
Resume
A
Stop
2.
Press (B) to reset the elapsed time to all
zeros.
3.
Press (C) three times to return to the
Timekeeping Mode.
Operation Guide 5526

Timer

The timer counts down from a start time
specified by you. A beeper sounds when the
end of the countdown is reached.
The beeper is muted in the cases described
●
below.
When battery power is low
—
Getting Ready
Enter the Timer Mode.
Navigating Between Modes
l

Setting the Timer Start Time

1.
Pull out the crown to the first click.
2.
Rotate the crown to change the
countdown start time setting.
The countdown start time can be set in
●
1-minute units up to 24 hours.
Seconds
Hours
3.
Push the crown back in.
Note
You can set a countdown start time
●
of 24 hours by aligning the small 24-
hour hand with 24.
24-hour
Crown
Minutes

Using the Timer

1.
Press (A) to start the countdown.
A beeper sounds for 10 seconds when the
end of the countdown is reached.
To pause an ongoing countdown, press
●
(A). To reset a paused countdown to the
start time, press (B).
2.
Press any button to stop the tone.
3.
Press (C) twice to return to the
Timekeeping Mode.

Alarm

The watch will beep when the alarm time is
reached.
The beeper is muted in the cases described
●
below.
When battery power is low
—
When watch is at Level 2 power saving
—
Power Saving
l
Getting ready
Enter the Alarm Mode.
Navigating Between Modes
l
14