Download Print this page

Canceling A Connection With A Phone; Using The Watch In A Medical Facility Or Aircraft; Unpairing; If You Purchase Another Phone - Casio 5526 Operation Manual

Hide thumbs

Advertisement

Table of Contents
Canceling a Connection with a
Phone
Pressing any button terminates the Bluetooth
connection and returns the second hand to its
normal operation.
Connected
After disconnection
Using the Watch in a Medical Facility
or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where auto time
calibration signal receive or connection with a
phone may cause problems, you can perform
the procedure below to disable such
operations. To re-enable auto time
adjustment, perform the same operation
again.
1.
Y Tap the "MR-G Connected" icon.
2.
X Hold down the (C) button for about 3.5
seconds.
This causes the second hand to move to
[C] and establishes a connection between
the watch and phone.
3.
Y Perform the operation shown on the
phone screen to enable or disable auto
time adjustment.

Unpairing

1.
X If the watch is connected with a phone,
press any button to terminate the
connection.
Connected
After disconnection
2.
Y Tap the "MR-G Connected" icon.
3.
Y Perform the operation shown on the
phone screen to unpair.
Operation Guide 5526
Note
If you are unable to re-pair the watch
with a phone after unpairing them,
use the procedure below to delete
pairing information from the watch
and then perform the pairing
operation again.
A X Pull out the crown to the second
click.
B X Hold down (B) for about 10
seconds.
This deletes the pairing information.
The second hand will point to [C].
C X Push the crown back in.

If you purchase another phone

You need to perform the pairing operation
whenever you want to establish a Bluetooth
connection with a phone for the first time.
C Pair the watch with a phone.
l
Note
If your previous phone is near the
watch while you are trying to pair with
a new phone, the watch will pair with
the previous phone, which makes it
impossible to pair with the new
phone. If this happens, use the
procedure below to delete the
previous pairing information from the
watch. Also, unregister the watch
from the phone you will no longer
connect with.
A X Pull out the crown to the second
click.
B X Hold down (B) for about 10
seconds.
This deletes the pairing information.
The second hand will point to [C].
C X Push the crown back in.
Adjusting Time
Settings Manually
You can use the procedure below to adjust the
watch's time and day settings when time
calibration signal reception or communication
with a phone is not possible for some reason.
Selecting Your Home City's
Time Zone
Use the procedure in this section to select the
time zone of the city you want to use as your
Home City.
Crown
Important!
If you do not specify the time zone
where you are using the watch, the
current time setting will not be
correct after it is adjusted based on
a time calibration signal.
1.
Pull out the crown to the second click.
The second hand indicates the currently
selected time zone, while the mode hand
indicates the current summer time setting.
The time zone is indicated as a time
offset. ±0 hours is indicated when the
second hand is at 12 o'clock, with other
offsets indicated when it is to the left and
right of 12 o'clock. For information about
time zone positions, go to the section
below.
City (Time Zone) List
l
Tokyo (+9 offset)
Summer time setting
2.
Rotate the crown to change the time zone.
3.
Push the crown back in to its normal
Crown
position.
Time zone (+9 position)
Crown
Crown
11

Advertisement

Table of Contents
loading