Table of Contents
Advertisement
2.
X Hold down (C) for about 2 seconds.
This will cause the watch to enter the
Timekeeping Mode.
3.
X Hold down the (B) button for about 3.5
seconds until the second hand points to
[C].
When a connection is established
between the watch and phone, then the
phone's ringtone will sound.
It will take a few seconds before the
●
phone tone sounds.
4.
X Press any button to stop the tone.
You can press any watch button to stop
●
the phone tone only during the first 30
seconds after it starts to sound.
Configuring Watch Settings
You can use MR-G Connected to specify the
amount of time until the Bluetooth connection
is automatically terminated and the
illumination duration, and to configure other
settings.
1.
Y Tap the "MR-G Connected" icon.
2.
X Hold down the (C) button for about 3.5
seconds.
This causes the second hand to move to
[C] and establishes a connection between
the watch and phone.
3.
Y Select the setting you want to change
and then perform the operation shown on
the phone screen.
Operation Guide 5526
Changing the Home City
Summer Time Setting
1.
Y Tap the "MR-G Connected" icon.
2.
X Hold down the (C) button for about 3.5
seconds.
This causes the second hand to move to
[C] and establishes a connection between
the watch and phone.
3.
Y Perform the operation shown on the
phone screen to change your World Time
summer time setting.
Checking the Watch Charge
Level
Use the procedure below to check the current
charge level with MR-G Connected.
1.
Y Tap the "MR-G Connected" icon.
2.
X Hold down the (C) button for about 3.5
seconds.
This causes the second hand to move to
[C] and establishes a connection between
the watch and phone.
3.
Y Use MR-G Connected to check the
charge level.
Connection
Connecting with a Phone
This section explains how to establish a
Bluetooth connection between a phone that is
paired with the watch.
If the watch is not paired with the phone, you
●
want to connect with, refer to the information
below and pair them.
C Pair the watch with a phone.
l
1.
Move the phone close to (within one meter
of) the watch.
2.
X While the second hand is not pointing to
[C], hold down the (C) button for about 3.5
seconds.
This causes the second hand to move to
[C] and establishes a connection between
the watch and phone.
Important!
If you have problems establishing a
●
connection, it could mean that MR-
G Connected is not running on the
phone. On the phone's home
screen, tap the "MR-G Connected"
icon. After the app starts up, hold
down the watch's (C) button for
about 3.5 seconds.
Note
The connection will be terminated if
●
you do not perform any operation on
the watch or phone for a fixed
amount of time.
To specify the connection limit time,
perform the following operation with
MR-G Connected: "Watch settings"
n "Connection time". Next, select a
setting of 3 minutes, 5 minutes, or 10
minutes.
10
Advertisement
Table of Contents
