Figure 26. Ms2Wfp Mains Voltage Selector Switch; Figure 27. Water Supply Connections - Bartington MS2 Operation Manual

BARTINGTON INSTRUMENTS

Figure 26. MS2WFP Mains voltage selector Switch.

20.1.2. Water Supply Connection
The closed water cooling system supplied with a reservoir and pump should normally be used.
However, in an emergency, the water supply can be derived from the relatively cool sub-surface
mains supply. Connect the inlet flow from the water pump to the lower 6mm nipple on the probe
type MS2W. Connect the outlet, which should be unrestricted and as short as possible, to the
upper nipple.

Figure 27. Water Supply Connections

Page 63 of 82 OM0408/49