Digital three-axis magnetic gradiometer (39 pages)
Summary of Contents for Bartington Mag-01
Page 1
This system is not qualified for use in explosive atmospheres or life support systems. Consult Bartington Instruments for advice. The copyright of this document is the property of Bartington Instruments Ltd. The document is supplied on the condition that it...
Mag-01 and Mag-01H electronics units Mag probes Accessories LIST OF FIGURES Note: All dimensions are in mm Figure 1 Analog output frequency response for Mag-01 and Mag-01H Figure 2 Mag-01 front panel functions Figure 3 Mag-01H front panel functions Figure 4...
A precision voltage to current converter maintains precise calibration over the full range of operating temperatures. The Mag-01H differs from the Mag-01 due to the addition of a x10 sensitivity control to increase resolution and the provision of a precision offset control to expand the measuring range.
Power supplies and battery charging The instruments are powered either continuously from the mains, via a power supply, or from the internal 6V rechargeable battery. The battery provides more than 12 hours continuous use. It can be recharged at 12V either from the mains or from a vehicle battery.
±1__________. The sign is preserved but only the leading 1 will be displayed. Analog output - See figure 1 The Mag-01 is primarily intended for the long term precise investigation of static or slowly varying, low intensity magnetic fields. The frequency response of the instrument is tailored to remove noise from high frequency sources.
Vector sensing The cores within the probe only respond to the component of a magnetic field which is along the axis of the cores. The probes are therefore vector sensing and produce a cosine directional response. The measured value V = Bmax Cosθ where Bmax is the total field strength and θ...
Page 7
Special probe type D/S possesses a shorter (9mm) sensing element and, when used in conjunction with the Mag-01(H) specially set up for the purpose, will permit measurements using the analog output of up to ±5.3V, equivalent to ±5.3mT, with the probe at a temperature no higher than 25 C.
Mounting the Cryogenic Probe The probe can be mounted by bonding, using a minimal mount epoxy adhesive, or by loosely supporting the probe within a tube. Proximity Effects No two Mag cryogenic probes should be operated within 10mm of each other if interaction is to be avoided.
Instructions for battery replacement Remove the two case retaining screws in the base of the instrument and remove the top cover. Disconnect the battery leads (Mag-01) or the battery connector (Mag-01H) and fit a replacement battery. Re-connect. 4.2 Electromagnetic compatibility The Mag-01 and Mag-01H instruments contain no high frequency electronics likely to cause emissions which could affect other apparatus.
TECHNICAL SPECIFICATIONS Mag-01 and Mag-01H electronics units Measuring range 0 to 0.2mT or 2mT depending on probe Bandwidth (low field probes) 0 to 10Hz, 20μT pk-pk, -12dB per octave roll off Calibration accuracy 0.1% (for ultimate accuracy see probe specifications) Maximum resolution 1nT (Mag-01), 0.1nT (Mag-01H)
10m Materials axial and transverse probes glass fibre reinforced plastic with brass jacket Dimensions see Mag-01 & Mag-01H brochure DS0003 ACCESSORIES Supplied Universal AC mains adaptor for 110V or 220/240V with outlet adaptors Vehicle dashboard connector - 12 V DC...
0.1μT B Peak (µT) measured ROLL OFF: -40dB/DECADE at V a out -12Bd/OCTA VE 0.01 Figure 1 ANALOG OUTPUT FREQUENCY RESPONSE FOR Mag-01 & Mag-01H DR0233(4) Mag -01 POWER POWER SWITCH 4 1/2 DIGIT LCD DISPLAY ILLUMINATED Displays directly in...
Page 13
12V DC z=1k W POLARITY PROTECTED FULL CHARGE 6 HOURS 2.1mm d.c. inlet Charge from mains adaptor or vehicle dashboard cable Voltage may be between 9-18V Figure 4 Mag-01 / Mag-01H REAR PANEL FUNCTIONS OM0382 ISSUE 8 PAGE 13 OF 14...
Page 14
BATTERY CHARGER INPUT REGULATED FILTER POWER SUPPLY CHARGE INDICATOR POWER 6V 1.1Ah ON / OFF SEALED BATTERY Figure 5 Mag-01 SYSTEM SCHEMATIC DR0223(4) A-D CONVERTOR & 4 1/2 DIGIT LCD RANGE CONTROL +19.999 SWITCH SUMMING AMPLIFIER & ATTENUATOR PRECISION VOLTAGE TO...