Ms2 Meter Rear Panel; Rear Panel; Connecting A Sensor; Figure 1B. Ms2 Meter, Rear Panel - Bartington MS2 Operation Manual

5.2 MS2 Meter Rear Panel

Key to Figure 1b
1. Power supply connector
2. RS-232 serial interface
3. Three-way rotary switch
4. Charging light

5.3. Rear Panel

The rear panel contains the following features:
1. Power supply connector: the power adaptor plug should be inserted here. For more
information see Internal
2. RS-232 serial interface: an MS2 RS-232 cable can be inserted here and connected to a
computer to allow control and communication using Bartsoft or Multisus software. For more
information see Serial
3. Three-way rotary Switch: allows the user to select one of three RS-232 communication
settings options. For more information see
4. Charging light: this LED will light up when power is connected and the MS2 battery is being
charged. For more information see

5.4. Connecting a Sensor

Connect the sensor to be used to the front panel socket of the MS2 meter with the supplied 50Ω
TNC-TNC cable, and switch on by selecting either SI or CGS units.
BARTINGTON INSTRUMENTS
4
1 2

Figure 1b. MS2 meter, rear panel.

Batteries.
Interface.
Serial
Internal Batteries.
Page 14 of 82
3
Interface.
OM0408/49