Example Wizard - Siemens SINAMICS IOP-2 Operating Instructions Manual

Wizards menu

5.1 Example Wizard

5.1 Example Wizard
Overview of wizards
The following example of how wizards work on the IOP-2 are purely for demonstration
purpose only.
Before commissioning an application
Prior to using a wizard, it is essential that the user's Control Unit and Power Module have
been installed and wired correctly, in accordance with the requirements of the user's
application. This is extremely important in the case of commissioning safety-integrated
applications. All inputs and outputs must be defined and configured before any
commissioning can take place, including the observation and adherence of all local,
national and international safety regulations required for the user's application and all
devices utilized by the user's application.
Basic commissioning wizard
The basic commissioning wizard is all the user needs to commission the converter in both
standard and safety modes. If the converter is a safety variant both wizards will be presented
in the wizards menu by default.
As from SINAMICS firmware V4.7 SP3 three new SINAMICS application classes are offered
for commissioning SINAMICS G120 drives, which are automatically preset independently of
the SINAMICS G120 Power Module used.
Standard Drive Control
● Standard Drive Control is preset for the Power Modules PM240, PM240-2 and G120C in
frame sizes FSA-C. This application class can, for example, be used for the following
applications:
– Pumps, fans and compressors with flow characteristic
– Wet or dry beam technology, mills, mixers, kneaders, crushers, agitators
– Horizontal conveyor technology (conveyor belts, roller conveyors, chain conveyors)
– Basic spindles
Dynamic Drive Control
● Dynamic Drive Control is preset for the Power Modules PM240, PM240-2 and PM330 in
frame sizes ≥ FSD. This application class can, for example, be used for the following
applications:
– Pumps and compressors with displacement machine
–
– Extruders
– Centrifuges
28
CAUTION
Rotary furnaces
Intelligent Operating Panel 2 (IOP-2)
Operating Instructions, 04/2017, FW V2.0, A5E39549448B AA