Siemens SINAMICS IOP-2 Operating Instructions Manual page 21

Language selection
The IOP-2 on first start-up will display the langauge screen for the user to select their
required language, should you wish to select you language manually, the following actions
should be performed:
Select Menu
Select language
All available languages are delivered with the IOP-2.
Setting time and date
When the IOP-2 is first fitted to a Control Unit, which has a real-time clock, it will
automatically display the time and date screen. Should you wish to manually set the time on
the IOP-2, the following actions should be performed:
Select Menu
Intelligent Operating Panel 2 (IOP-2)
Operating Instructions, 04/2017, FW V2.0, A5E39549448B AA
Select Extras
Select required language
Select Extras
Installation
4.2 Initial set-up
Select Panel settings
Press and hold down ESC for
Status Screen
Select Panel settings
21